Which Model SSR Wheel is this?

[82bmw633]

I have a set of SSR III 18x8 wheels which I am refinishing. I removed the valve stems and searched SSR valve stems but I can’t find the same ones as were on the wheels. I’m not sure which model wheel this is. Also, the valve stem OA length is about 39mm.

Can I use a generic metal valve stem?

Thanks.

3E91D375-274E-4BD5-B515-2EF8211EE318.jpgD49E4466-6AB0-4046-B6CF-93E89EDF9CF0.jpg

[The sage]

They look like SSR GT2.

[82bmw633]

30811700[/URL]]They look like SSR GT2.

Thank you. SSR doesn’t show my valve stem on their website so I emailed them to see if any of the newer ones will work.

The GT2 doesn’t show up in any of the descriptions for the current valve stems.


Sent from my iPhone using Tapatalk

[ZahraM5]

To be honest, it also looked like SSR GT2

[R.Thomas]

Measure the valve stem hole diameter. You may able to get a set thru Black Forest Industries (that's what I did for my 3 piece ACS / OZ Type 1 wheels).

[82bmw633]

30813315[/URL]]Measure the valve stem hole diameter. You may able to get a set thru Black Forest Industries (that's what I did for my 3 piece ACS / OZ Type 1 wheels).

interestingly, I bought a set of metal valve stems off Amazon.

The valve stems on the wheels had 5 parts - stem, bottom rubber washer (inside the rim), rubber washer on the outside, metal washer, elongated nut. I kept the outer metal washer and bought new outer rubber washers (measured and bought off Amazon). Have to use the elongated nut for clearance. So instead of $90 from SSR I spent about $16.

[R.Thomas]

Excellent! Glad it worked out.