Clearing service codes

[Hammer1963]

Hello anyone reading this!
I have a 2017 340i xdrive and I’m wondering how to clear service reminders/reset oil life and so on. I’ve been trying to find this info in YouTube but so far, no luck for this particular model. The car only has 44000 kms on it but is off warranty now. I have a service reminder now for the annual brake flush. Once I know how to clear that, I should be golden for resetting oil life and so on. Any help would be much appreciated.
Thanks

[dworthy]

FYI from the TIS:

CBS reset of inspections/tests required by law


The input of the target date for the statutory deadlines (vehicle inspection/exhaust-gas test) is done by clicking on the scope with the controller in the CBS menu of the control display under:


Select main menu and press controller
Select vehicle information and press controller
Select vehicle status and press controller
Select Service requirements and press controller
Select vehicle inspection and press controller
Select Schedule date for service and press controller
The target month or the target year can be set and acknowledged by turning and pressing

[328 Power 04]

Copy paste from bimmerpost (user Sephanite):

1. Without pressing the brake/clutch, press the start/stop button
2. Wait for the service reminder to disappear
3. Press and hold the odometer reset button. You will notice your trip meter reset and then go back to the value it once was. Keep holding for a couple more seconds

At this point, service values that can be reset will come up. Use the odometer reset button to scroll through the menu.

4. At the value you want to reset, press and hold the odometer reset button. "Reset possible" will change to "Reset?"
5. Press and hold odometer reset button again until value is reset
6. Press the start/stop button to start car or turn off car

[Hammer1963]

Thank you for the info everyone, I will give this a go