I have a ’95 325i convertible with a semi-automatic top, the top won’t function at all, it acts like it has no power. I pulled the release bar, stowed the top and reset the motors and was able to hold the convertible switch and the top went up like it should when being reset. I then went to lower the top and it still did nothing, acting like it had no power. Now the weird thing is that I can open the trunk even with the tonneau cover up. I replaced the control module and the problem remains unchanged. I assume that there is one of the three micro switches that is bad. When I push the trunk switch on the right side tonneau latch I can hear the trunk switch activate, but the trunk remains unlocked. Any help or ideas on how to test stuff would be great. Thanks in advance.