FS Z3 interior door pulls black

[caglar]

I have a pair of Z3 interior door pulls in black (not M style leather) in good condition.
Price $400 US + shipping

[robb1887]

Both are missing their plastic "welded studs" on the upper section FYSA

[caglar]

Correct but I believe you cannot remove them from door card without taking those off. They were like this when I removed the doorcards so probably previous owner had them out.

[robb1887]

Correct but I believe you cannot remove them from door card without taking those off. They were like this when I removed the doorcards so probably previous owner had them out.

Requires a hot iron (wood burning/soldering iron) to displace the melted plastic stud to pull through the existing hole and re-spreading it at reassembly. Mine were cracked off similar to these and replaced it with an M6 stud and nut after tapping a hole where the plastic stud once was. There is an old thread of mine showing that "repair" as well.

[caglar]

Great suggestion. Yes saw your post with the replacement which makes sense.