It's my ASA TM-12 I am rebuilding from yeaaaaaaaaaaars ago. Bought a billet wheel for it and just received a ton of parts from overseas. I have a semi thread going on here: https://www.bimmerforums.com/forum/s...3#post30825153
"You may all go to Hell, and I will go to Texas."
Davy Crockett
www.Angry-Ass.com
My Build Thread Part 1, Part 2
DIY E31 X-Brace Mod and Install
DIY Rear Seat Backrest Modification for E32 Armrest
It looks like it's been used, so I believe it was actually pulled from an M52 or M54 car running an ASA supercharger. Obviously the Alpina models (on V8s) have totally different mounting right to the engine w/ oil passing through the bracketry, so this had to come from a TM-12 or TM-15 car. Years ago when I put this supercharger on my E34 I crudely cut a bracket out of like 5/16" aluminum plate and did my best to make it fit. It worked, but it was crude. This unit looks like what I see on G Power/ESS cars running TM-12/TM-15 blowers.
Have been swamped with Angry Ass thanks to you all but between that and waiting on a few components to get plated for the water to oil cooler I took the time to develop jack pads to make lifting the car a bit easier. We're machining these this coming week from UHMW but have been very happy with them over the last few months even being 3D printed in ABS.
Jack Puck Proto by 93FIM5, on Flickr
Little test fit video with the optional magnets.
Also wrapped up production on our low profile engine mount arm for the S38 and M30 in the E34 and E32. This came about because of the need to fit certain Italian made headers on the S38 that won't fit with the stock engine mount arm. . . even after they tweaked the design. We took the opportunity to make sure it had plenty of clearance for forced induction applications as well.
Passenger Mount Arm by 93FIM5, on Flickr
I'm currently working on billet aluminum interior door handle pulls as well as amber puddle lighting as an option. 3D printed mockup to check geometry.
Handle Test by 93FIM5, on Flickr
This will tie in with other touch points such as the climate knobs and possibly the light switch gear.
-Greg
"You may all go to Hell, and I will go to Texas."
Davy Crockett
www.Angry-Ass.com
My Build Thread Part 1, Part 2
DIY E31 X-Brace Mod and Install
DIY Rear Seat Backrest Modification for E32 Armrest
Love to see the developments, especially on those door handles. Real metal would be a great touchpoint upgrade!
Sent from my SM-S901U1 using Tapatalk
O o
/Ż____________________________ ______________
| BLAAAAAAAAAAAAAAAAAAAHHHHHHHH! !!!!
\_ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ ŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
Agree! Me likey those door handles.
Sent from my iPhone using Tapatalk
Ol Greg is still at it! Nice to see after all these years.
Recently purchased some door handles myself. Caught up with mr. NikosX recently as well.
Hope all is well!
Sent from my iPhone using Tapatalk
Current
2005 E55 AMG
1998 Silverado K1500
1964 Impala
1964 Chevelle 496ci
Past
2000 Avus M5
1988 Suburban K1500
1987 Suburban K2500
2007 Suburban
1999 K2500 Suburban
2000 MGM
1999 K2500 Suburban
2001 Stratus 740i Msport
1990 750iL
1995 540i/6
1996 MGM
This is badass stuff. Ol' Greg lol
Billet aluminum is so nice. I know who to bother now for the next engine swap
Bookmarks