Hello. I bought an E87, 2006, 120d, 163HP, DPF (off), M47D2 (timing chain in front). When i bought it, the engine eats and burned oil a lot. It was told to me that the turbo it’s the problem, the shaft was playing. Ok, i changed the core of the turbo, the hoses and intercooler was not cleaned. I change de oil and all filters included breath valve oil separator with a vortex one (that was done before i change the core of turbo).

After all of that the engine still eats and burns oil. This happens when the engine is warm, and i depress the acceleration and intervenes the engine brake, or when i’m driving with the first gear at low speed.

About the DPF, it is only the shell of it, and empty inside. I didn’t do that, i bought the car like this. I don’t know if it’s softed or not but i don’t have any light on for dpf on the dashboard, and no errors on inpa only this one: * P14A6 BMW - Diesel Particulate Filter System Flow Resistance Too Low. (on INPA)

The smoke is blueish with smell of burned oil.
VIDEO: https://streamable.com/scc2gn

Air-mass meter test BEFORE TURBO CORE CHANGE:
1. https://ibb.co/WHDmzZW
2. https://ibb.co/7vqbrDh
3. https://ibb.co/19YqNhc
4. https://ibb.co/J7xRVDq
5. https://ibb.co/JHTNSCb
6. https://ibb.co/3BnZXWy
7. https://ibb.co/NNw9CVr
8. https://ibb.co/qRNWz0s