I'm about 95% of the way finished with lowering my e36 and I have run into an issue that I know is an issue for many lowered cars, my sway bar is contacting the lower control arm. I'm wondering if anyone has tried running Z3 end links in place of the stock e36 ones. They appear to be the same design just shorter by what I can only estimate to be about an inch which would be perfect for getting the bar out of contact. I'm not even that low, I'm just trying to get the car to sit right below the treads on my stock tires.
Current Cars: 1995 325i Sedan (Super Clean Turbo Build Project), 2020 Mitsubishi Mirage (Because everyone needs something reliable)
RIP 1999 328i (Cremated); You were a lot of fun, and many of your parts will live on in my new project. You'll never be forgotten.
Project Bike: 1982 Suzuki GS 1100g Super Cafe Racer Build
Follow Me:
Instagram: https://www.instagram.com/deltadeconstruct/
Facebook: https://www.facebook.com/Delta.DeConstruct
Haven't tried, but stock z3 rear link is 10.5cm max length.
Bookmarks