Z3M parting out aftermarket parts

[nevan]

Hi all,

I'm in the process of parting out all aftermarket parts (except the blower) on my z3, so let me know if any of these items interest you.

Not looking to gain anything, just want them to go to good homes where appreciated.

Either pick up or shipping (92129) is fine. Thanks!

- Chrome roll bars and the clear lexan wind deflector (a matching set, can be sold separately)
- AEM WMI kit with a custom mount to SAP location, WMI filter, solenoid, and windshield fluid reservoir tapped methanol tank. $200 plus shipping
- Two spare DMEs (MS41.1) with whatever the possible setting you need (even back to stock bin if prefered). No afr/ignition related tuning for liability reason (but with the wealth of knowledge on this forum, I'm sure you'll be able to figure out to do it yourself or I can help you to set up if you prefer)
- Innovate LC1 AFR gauge with a wb sensor
- A set of stock cat-back mufflers that has 3" chrome tips and cutout valves (closed style, vacuum) installed.
- A set of new 2" vacuum cut-off valves (open style) with two solenoids/remote switches
- Spring-loaded adjustable BOV
- 3.33" & 3.66" vortech pulley (6-rib) with matching serpentine belt for VFE sc kit. - A direct swap Sold each plus shipping
- Oil cooler cap (for oil filter housing). The heat exchanger and thermostat will come free with the cap (oil line hose, not included because you should probably get a new line for them).
- SPL electric fan (30100400) with its own single temp switch and relay
- E85 fuel pump with an assembly that has a new fuel level float sensor
- Front strut bar
- OEM Chrome shift knob (New) (If you own a z3 m, you will lose the light illumination with the chrome knob unless you modify it to transfer the lighting components like led and wiring from the z3m)
- Aluminum thermostat housing $1 plus shipping
- Canadian DRL light relay
- More to come... Let me know if you see any other aftermarket-ish things that aren't listed here (but you see in the link below). The chances are they will most likely be taken off.

All parts are shown in my build thread (if not, I can upload):
https://www.bimmerforums.com/forum/s...ster-log/page2

[caglar]

Interested in the roll bars with the deflector. Would you be comfortable shipping to canada? I would just need to know what the package weighs so that I can try to guess shipping cost.

[nevan]

Interested in the roll bars with the deflector. Would you be comfortable shipping to canada? I would just need to know what the package weighs so that I can try to guess shipping cost.

I can ship them there. But it may be pricy.

Each roll bar weighs about 4.5 lb. So the total should be about 10 lbs.

If you have shipping access, you can send me a label to save on shipping.

[Andryuha]

Pics of the oil cooler setup? I am interested.

[nevan]

Pics of the oil cooler setup? I am interested.

https://www.bimmerforums.com/forum/a...8&d=1478327498
Please note that the oil line and fitting are replaced now (it has non-metal-braided sleeve hose)

https://www.bimmerforums.com/forum/a...9&d=1478329457

[robb1887]

What SPAL fan? I'm interested depending on the model.

[nevan]

what spal fan? I'm interested depending on the model.

spal 30100400

[robb1887]

PM me shipped cost to 23314

[DrWho]

- E85 fuel pump with an assembly that has a new fuel level float sensor $50 plus shipping

Is this a direct bolt in and a upgrade ? My fuel pump seems to have died.

[nevan]

- E85 fuel pump with an assembly that has a new fuel level float sensor $50 plus shipping

Is this a direct bolt in and a upgrade ? My fuel pump seems to have died.

Hi, I actually changed my mind about selling the fuel pump for the future use. Apologies.

[DrWho]

Hi, I actually changed my mind about selling the fuel pump for the future use. Apologies.

No worries, best of luck.

[frigga]

Hi - It's not listed as some of your parts for sale, but curious if you wanted to sell your LeatherZ armrest and ZHP shift knob?

[nevan]

Hi - It's not listed as some of your parts for sale, but curious if you wanted to sell your LeatherZ armrest and ZHP shift knob?

The arm rest is staying. Sorry.

[nevan]

Photos for the additional items added above:

https://www.bimmerforums.com/forum/s...4#post30714424

[nevan]

Hi - It's not listed as some of your parts for sale, but curious if you wanted to sell your LeatherZ armrest and ZHP shift knob?

The ZHP knob is long gone. But I just found a new chrome knob in the garage (that I didn't know I had). Let me know if you want that instead.

https://www.bimmerforums.com/forum/s...4#post30714424

[sydjai]

I will take the strut bar and the thermostat housing. PM Sent.

[nige61]

I replaced the foot well speakers and stupidly lost the bonnet pull handle. Any ideas where I can source a replacement please?

[nevan]

I will take the strut bar and the thermostat housing. PM Sent.

I just saw your post today. Sincere apologies for the late reply. Do you still want them? If so, PM me your your address with ZIP so I can give you the shipping estimate.

[nevan]

I replaced the foot well speakers and stupidly lost the bonnet pull handle. Any ideas where I can source a replacement please?

I bet you can find one on eBay easily. Be sure to get the correct driver side version for your country (check with realoem.com for part number). Good luck!

[nige61]

Thank you, much appreciated. yes ebay for around £12.

[KBH22102]

I replaced the foot well speakers and stupidly lost the bonnet pull handle. Any ideas where I can source a replacement please?

Doug Whalen was selling the last of his stock of RHD aluminum hood pull levers. He might still have a few. Outstanding product.

https://m.facebook.com/story/graphql...I4NDE5MzIyMTA2

[TexaZ3]

Still have strut bar?

[nevan]

Still have strut bar?

It's gone now. Sorry.