WTB: WTB: Looking for 17X8.5 wheels, 72.56 bore, 5X120, low offset, no bends or cracks

[m60power]

WTB: WTB: Looking for 17X8.5 wheels, 72.56 bore, 5X120, low offset, no bends or cracks

I'm looking to buy 17x8.5 wheels, 5x120, 72.56 bore. Must be in good condition with no bends, cracks or bad curb rash. preferably anywhere in the 10 to 20mm offset range.

I'll also consider 18x8.5 or 8.5 and 9.5 staggered widths. With or without tires. I'm in Florida and prefer local pickup

List Date: 3/12/2014

For more info, click here to view the original listing: WTB: WTB: Looking for 17X8.5 wheels, 72.56 bore, 5X120, low offset, no bends or cracks
--------------------------------------
Want to Buy (WTB) Please Contact Buyer with offers.


--------------------------------------

[m60power]

Bump

[E34nication]

I've got 72.56 cb, 17x8.5 et13 oz Monte Carlos for sale with nearly brand new (3-400 miles) 235/45/17 Dunlop Direzza ZII's for sale. No bends, cracks or bad curb rash, but silver finish has lost some color in small areas. Have center caps for them as well. $900 + shipping.




Located in Tampa.

[GoBLue]

^are you running spacers to clear that BBK?

[E34nication]

I've got spacers up front to clear the coilover collar, there's a lot of room between rim and caliper.

[xlr8tin]

I have staggered 17" BBS RXs

[m60power]

I have staggered 17" BBS RXs

Thanks for the reply; not really a fan of the RX's though

[E34nication]

What about some 17x10, 3 piece oz futuras?

[m60power]

What about some 17x10, 3 piece oz futuras?

Wow, now those are sharp looking wheels! I like them a lot. Do they come in smaller widths? I imagine 10 inches wide on the front of an e32 is pushing it.

[E34nication]

I don't have any personal experience with e32's so I'm not sure. With the right tire I'm sure they could be made to fit, but it might take some fiddling with spacers for inner clearance. Doesn't really sound like that's what you're looking for. They're 3 piece wheels so the size/offset options are plentiful... These use OZ 35 hole barrels.

[m60power]

I don't have any personal experience with e32's so I'm not sure. With the right tire I'm sure they could be made to fit, but it might take some fiddling with spacers for inner clearance. Doesn't really sound like that's what you're looking for. They're 3 piece wheels so the size/offset options are plentiful... These use OZ 35 hole barrels.

Cool thanks for the info. Yeah I'm not really looking for wheels that wide, especially on the fronts.

[xlr8tin]

I had 10" wide wheels on the rear of my 1990 750il that I used to have. Fit like a glove. Zero issues and it was lowered. I only had 18x9 (If I remember correctly, maybe 9.5) You might just have to do a narrower tire. I want to say clearance for the wheel itself would work

[m60power]

Bumping this thread to the top again, after 7 years Thanks to those who replied in the past.

I'm on the hunt for wheels for another E32 that I have (hub bore is 72.56mm). Same size/offset/etc. as my original post - Preferably 17x8.5 square setup, offset ET13 - ET15, reasonably light weight, good to great condition, and a style that works well with the E32 (something period-correct is ideal, but open to modern designs if they look decent on the E32).

[PaulCSmith]

Hey, I have a set of mint condition 3 piece AC Schnitzer Type 2's. They're 17x8.5 et13, hubcentric with 235/40/17 Toyo S-drives with about 300 miles on them. I saw them for sale and snatched them up to see if they'd fit my e36 M3 but they're too aggressive of a fitment to fit and my car is too clean to mess up the fenders. I'm in MN and was trying to sell local but figured I'd let you know. Asking $3200 plus shipping.

[m60power]

Hey, I have a set of mint condition 3 piece AC Schnitzer Type 2's. They're 17x8.5 et13, hubcentric with 235/40/17 Toyo S-drives with about 300 miles on them. I saw them for sale and snatched them up to see if they'd fit my e36 M3 but they're too aggressive of a fitment to fit and my car is too clean to mess up the fenders. I'm in MN and was trying to sell local but figured I'd let you know. Asking $3200 plus shipping.

I appreciate the heads up. Those wheels are pretty rare/cool, I like the Type 2 Racing but I'll have to give some thought to how they'll look on the E32. I'll PM you if I'm interested.

[PaulCSmith]

Sounds good. I think they’d look amazing on it personally I can send some pics if interested.