Results 1 to 3 of 3

Thread: BMW Remote Keyless Entry Fob 2-Button A269ZUA111

  1. #1
    Join Date
    Feb 2003
    Location
    Easley, SC
    Posts
    2,740
    My Cars
    E53 X5, E90 335d

    BMW Remote Keyless Entry Fob 2-Button A269ZUA111

    I have a BMW Alpine Remote Keyless Entry Security System Key Fob for sale. The fob is in great working condition. I have also provided the programming instructions at the bottom of this post to assist in setting this unit up with your car.

    FCC ID: A269ZUA111
    BMW Part No: 82 11 1 469 448

    Note that this unit is only compatible with BMW systems. The Subaru variant that can be found on eBay will not work unless you open the unit and swap out the surface mounted chips.

    Shipping only to CONUS. Price: $80 shipped.

    ----------------------------------------

    REPROGRAMMING PROCEDURE

    1. Close all doors, trunk, and hood.
    2. The security system must be in "disarm" mode. The key must be removed from the ignition key slot.

    Enter Code-Learning Mode
    3. Open the trunk and leave it open.
    4. Open the driver's door and sit in the driver's seat.
    5. Close the driver's door.
    6. Cycle the ignition switch 5 times between the "off" position and position 2 (ignition "ON", all dash warning lamps will illuminate)
    6b. Remove the key from the ignition. The red status LED will illuminate continuously, and the siren will "chirp" once, to indicate that the code-learning mode has been initiated.

    DO NOT START THE ENGINE

    The ignition switch cycling in step #6 must be performed within ten seconds.

    The sequence in steps #1-6 must be performed within 45 seconds.

    Registering/Delete ID Code(s)
    7. Open driver's door, (remain seated in driver's seat)
    8. Close driver's door.
    9. Press and release any button on the remote you wish to register into the system. The status LED will shut off momentarily to indicate that one ID code has been registered.
    10. Repeat steps 7 through 9 to register the remaining three ID codes.

    Exiting Code-Learning Mode
    11. Open driver's door, and exit from vehicle, leaving the door opened.
    12. Close trunk.
    13. Close driver's door. The LED will turn off and the siren will "chirp" twice.
    14. The initialization procedure is now completed, test all remotes to confirm operation
    Toledo E53 X5 | LeMans E90 335d

  2. #2
    Join Date
    Jun 2013
    Location
    Houston, TX
    Posts
    44
    My Cars
    1997 328i
    Is this still available? Can you PM some pictures?

  3. #3
    Join Date
    Feb 2003
    Location
    Easley, SC
    Posts
    2,740
    My Cars
    E53 X5, E90 335d
    It is sold, sorry.
    Toledo E53 X5 | LeMans E90 335d

Similar Threads

  1. BMW Remote Keyless Entry Fob 2-Button A269ZUA111 - SOLD
    By GaryE30 in forum Car Audio & Electronics
    Replies: 0
    Last Post: 05-26-2014, 07:09 PM
  2. BMW Remote Keyless Entry Fob Smart Keys
    By MPOWERED23 in forum Car Audio & Electronics
    Replies: 1
    Last Post: 12-23-2012, 09:44 AM
  3. OEM BMW Remote Keyless Entry/Security System w/ key fob $150
    By cincyE34 in forum E34 Classifieds (closing soon)
    Replies: 15
    Last Post: 08-11-2011, 09:44 PM
  4. WTB - BMW remote keyless entry fobs
    By rollie in forum BMW Parts Wanted
    Replies: 0
    Last Post: 04-13-2004, 11:19 AM
  5. Programming BMW factory keyless entry "fobs" (remotes)??
    By Cobra Jet in forum 1992 - 1999 M3 (E36)
    Replies: 2
    Last Post: 07-23-2003, 12:13 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •