FS: F+R Stoptech ST40 BBK, E36 M3 (red)

[SamGrant951]

SOLD




ST-40 332 x 32 front and rear BBK for E36 M3.

Front calipers were rebuilt last year with Racing Brake (www.racingbrake.com) SS pistons / high temp seals/boots ($350) along with 4lb anti-knockback springs, limited mileage since then. Front brake lines replaced at that time as well, prob <250 miles since rebuild.

Rear caliper kit only has ~1k miles or so.

When I bought the rear BBK I swapped the new rear rotors to the front and old front rotors to the rear as all the same size. Beauty of the kit is being able to use same size rotors / pads all around.

Current rotor measurements:

F: 31.8mm
R: 31.3mm

Multiple sets of Hawk DTC-60s included along with a near new set of ST-40 Stoptech street pads, all brackets/brake lines included with sale.

Let me know if you have any questions, local pickup in Indy, IN or will ship at actual cost.

$3k + ship

Link to thread with pictures: https://nam3forum.com/forums/forum/c...for-e36-m3-red

[SamGrant951]

Had some questions re: splitting the kit up and selling just the front or rear, would be open to that. Send me a note/make an offer.

[SamGrant951]

$2750

[SamGrant951]

$2500!!