Does anyone know what wires that will need +12 or ground to fire a m60b40 in another car than the stock one. The engine comes from a e32 740ia There is not a single wire left in the car so will need to start from scratch. The dme has the ews delete and so on. The starter works but no spark or fuel. Any hjelp would be appreciated. Kind off at a loss atm.
Sounds like you need to buy a wiring manual.. or hope someone will just tell you how to do it step by step.. but buying the manual is going to be quicker
2006 X5 L83 5.3 6l80 swapped in progress
1999 528i 5.7L 4l60e swapped w/ 31 spline 8.8 cobra diff
2007 ZX-10r - sold
1987 R-10 SWB L83 5.3L 6L80e swapped
Try here: http://wedophones.com/BMWManualsLead.htm
If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower. - Mark Donohue
Bookmarks