Results 1 to 2 of 2

Thread: *NEW PRODUCT* MAD Intercooler & Charge Pipe W/ Install Video

  1. #1
    Join Date
    Jan 2017
    Location
    Las Vegas
    Posts
    2,887
    My Cars
    335,328

    Talking *NEW PRODUCT* MAD Intercooler & Charge Pipe W/ Install Video

    In this video, the stock intercooler and FTP charge pipe were replaced by the MAD FMIC 5" & CP





    Upgrade from your stock intercooler to the MAD stepped core intercooler for maximum performance and reliability!


    The stock BMW intercooler is small, inefficient, and cannot keep up with the high boost that your tuned car targets. MAD BMW 5” intercooler will keep the intake air temperature in check, allowing your BMW to perform at its best at all times.


    The MAD F chassis BMW 5” intercooler uses a high fin density core for maximum cooling. It also features a stepped core design to maximize the cooling area. Weighing 22lbs only with dimensions of 21"x8.5"x5", It provides the perfect cooling solution for stage 1 applications.


    This intercooler is compatible with stock and aftermarket charge pipes.


    Features:

    Direct stock replacement, no cutting required
    High-quality stepped core
    Lifetime warranty on defects and fitment
    Spot on fitment
    Fits rear-wheel-drive & X-drive models



    Fitment:

    M135
    228
    M235
    M2
    F chassis 328
    F chassis 335
    428
    435


    SKU:

    MAD-010





    Upgrade from the stock BMW N55 charge pipe to the MAD N55 charge pipe for maximum airflow and reliability!


    The stock BMW N55 charge pipe is plastic and prone to failure. It's only a matter of time before the charge pipe to break. The MAD N55 charge pipe is a strong aluminum piece; it will provide better airflow and won't fail, and fits like stock.


    The MAD charge pipe retains the BMW C-clip and O-ring for the best fitment. Do not forget to move them from the stock charge pipe to the MAD option.


    The MAD charge pipe comes with two meth bungs; both bungs are sealed. If you do not intend to use methanol injection, keep them closed.


    Features:

    Better airflow
    More robust material (aluminum vs. plastic)
    Two meth bungs
    Lifetime warranty on defects and fitment
    Spot on fitment




    Fitment:


    Fits Rear-wheel drive vehicles only.

    2012-2015 135i
    2014-2016 M235
    2016-2018 M2
    2012-2015 335i
    2014-2016 435i



    SKU:

    MAD-017

  2. #2
    Join Date
    Jan 2017
    Location
    Las Vegas
    Posts
    2,887
    My Cars
    335,328

Similar Threads

  1. 15% OFF ETS Intercooler, Intake & Charge Pipes ***BLACK FRIDAY SALE***
    By mike@XPH in forum Group Purchases & Supporting Vendor Specials presented by eBay
    Replies: 1
    Last Post: 12-18-2017, 01:55 PM
  2. Active Autowerke N55 Charge Pipe DIY Install Video
    By mike@XPH in forum 2012-2019 (F30, F32, F33, F34, F36)
    Replies: 0
    Last Post: 07-18-2017, 02:55 PM
  3. Replies: 0
    Last Post: 07-18-2017, 02:55 PM
  4. Active Autowerke N55 Charge Pipe DIY Install Video
    By mike@XPH in forum 1 Series & 2 Series (E81, E82, E87, E88, F20, F22, F23, F40, G42)
    Replies: 0
    Last Post: 07-18-2017, 02:54 PM
  5. New Product Active Autowerke F Chassis N55 Upgraded Charge Pipe
    By mike@XPH in forum 1 Series & 2 Series (E81, E82, E87, E88, F20, F22, F23, F40, G42)
    Replies: 0
    Last Post: 06-15-2017, 07:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •