Do you like carbon fiber?

**LWRNCE** · 02-01-2021, 08:15 PM

Ive been MIA but i've been lurking. Now I am back with BMW North America previously with Mercedes-Benz. Ive seen some of your guys posts and the cars look great. Here is a sneak peak of what is going on with my ride. YES I STILL HAVE IT. I promise I will post more than one picture.

PTG. 1000000000% authentic courtesy of Randy and the crew at PGC. He is responsible for the aero and carbon work on the championship PTG/BMW North America's race cars. Wing alone weighs 6.5lbs excluding hardware.

This is not a flex I just hope the way I modify my cars inspires the younger generations to do it the right way. Work hard and spend money on quality parts. Ultimately modify it they way YOU want to. I joined this forum back when I was 18?! So I hope this inspires someone who loves modifying cars as much as I do.

@e36LWRNCE on IG

.... Power by 2JZ.

**xxxxxxx** · 02-02-2021, 10:27 PM

Glorious.

I remember you from back in the early 2k's. Many lost usernames ago.

**Mless5** · 02-02-2021, 11:17 PM

Originally Posted by xxxxxxx

Glorious.

I remember you from back in the early 2k's. Many lost usernames ago.

Yep yep yep - glad to see old name coming back!

**lilxyoshi** · 02-03-2021, 03:09 AM

Following (:

**Keda** · 02-03-2021, 09:48 AM

PGC does great work, and overall the wing is very nice. From the pic, it looks like the wing base doesn't align well with the lip portion—a bit of overhang on the insides of the risers. Does it look this way in person? Do you expect this to self correct when mounted?

**Bsaint** · 02-03-2021, 10:33 AM

Looking good brotha!

It's always great to see fellow old school members still modifying their BMW's

**propcar** · 02-03-2021, 02:48 PM

Originally Posted by Keda

PGC does great work, and overall the wing is very nice. From the pic, it looks like the wing base doesn't align well with the lip portion—a bit of overhang on the insides of the risers. Does it look this way in person? Do you expect this to self correct when mounted?

It's likely not even screwed down. Also if you look at some of the OEM wings they didn't fit 100% perfect. Plus being a race-car part made from molds from the original parts... I think the fitment will be as authentic as one would reasonably expect.

**LWRNCE** · 02-05-2021, 05:19 AM

Originally Posted by xxxxxxx

Glorious.

I remember you from back in the early 2k's. Many lost usernames ago.

LOL many lost usernames. This forum is dead it used to be poppin back in the day. What the happened?!?

- - - Updated - - -

Originally Posted by Keda

PGC does great work, and overall the wing is very nice. From the pic, it looks like the wing base doesn't align well with the lip portion—a bit of overhang on the insides of the risers. Does it look this way in person? Do you expect this to self correct when mounted?

This isn't all completed bolted together yet. Fitment with with PGC is as close to factory you can get.

Originally Posted by lilxyoshi

Following (:

DR. YOSHI watttup my guy!

Originally Posted by Bsaint

Looking good brotha!

It's always great to see fellow old school members still modifying their BMW's

YESSSIR! Thank you.

Originally Posted by propcar

It's likely not even screwed down. Also if you look at some of the OEM wings they didn't fit 100% perfect. Plus being a race-car part made from molds from the original parts... I think the fitment will be as authentic as one would reasonably expect.

**DrftKingIII** · 02-05-2021, 09:22 AM

Hot DOG that's nice looking.

**LWRNCE** · 02-05-2021, 07:18 PM

Originally Posted by DrftKingIII

Hot DOG that's nice looking.

Thank you. I am just waiting for the carbon fenders now

**scoobiedoo2029** · 02-07-2021, 12:18 AM

Originally Posted by LWRNCE

Thank you. I am just waiting for the carbon fenders now

about that... are you going to have a ptg style wheel arch? or have they lowered it to make for less monster wheel gap on a "stock" style suspension. or are you planning on going all out with raised strut towers and tubular control ams and whatnot....

ive always wanted to see what bmw\ptg did to the true race cars suspensions. there once was a website e30m3proformance.com that had a complete walkthrough of the dtm/group a e30 m3's, had all the different rear trailing arms shown and everything, showed all the adjusters and blade swaybar hardware ect. it was true car porn. never seen anything like that for the latter bmw's best ive seen is a e46 on a lift showing the tubular subframe and e36's with the e30 dtm style front hardware from engine bay pics.

enthusiast auto has a e36 race car that looks legit..... i kinda want to plead with them to put it on a lift for their youtube channel.

**LWRNCE** · 02-07-2021, 02:35 AM

Originally Posted by scoobiedoo2029

about that... are you going to have a ptg style wheel arch? or have they lowered it to make for less monster wheel gap on a "stock" style suspension. or are you planning on going all out with raised strut towers and tubular control ams and whatnot....

ive always wanted to see what bmw\ptg did to the true race cars suspensions. there once was a website e30m3proformance.com that had a complete walkthrough of the dtm/group a e30 m3's, had all the different rear trailing arms shown and everything, showed all the adjusters and blade swaybar hardware ect. it was true car porn. never seen anything like that for the latter bmw's best ive seen is a e46 on a lift showing the tubular subframe and e36's with the e30 dtm style front hardware from engine bay pics.

enthusiast auto has a e36 race car that looks legit..... i kinda want to plead with them to put it on a lift for their youtube channel.

We are getting the kit on first. We will then make adjustments to the suspension as needed. Vehicle is currently very low as it is with a lot more to go. The car sits on KW's right now.

**thedude60126** · 02-09-2021, 07:40 PM

Dude that looks awesome man please let me know when they become for sale. Awesome job

**m3j0n** · 02-11-2021, 10:39 PM

nice!!!

**GG///M3** · 02-12-2021, 06:22 AM

Originally Posted by LWRNCE

LOL many lost usernames. This forum is dead it used to be poppin back in the day. What the happened?!?

- - - Updated - - -

This isn't all completed bolted together yet. Fitment with with PGC is as close to factory you can get.

DR. YOSHI watttup my guy!

YESSSIR! Thank you.

I wouldn’t say it’s dead. People have moved on to Zucks dumb sites instead of supporting places like BFC. I plan keeping my threads here, and nee ones to come.

Love the carbon bits.

**Spyke** · 02-12-2021, 07:46 PM

Stupidly glorious, I love everything about this!!!

**DekaB** · 02-20-2021, 02:07 AM

This is awesome.

**LWRNCE** · 03-05-2021, 10:51 PM

Update... Just a quick test fit.

Not bolted down PTG full carbon fiber 6.5lbs excluding hardware and brake lamp. Brake lamp will sit flush when installation is completed.

**Spyke** · 03-09-2021, 07:00 PM

Hautte!!!!!!

**Msilvia** · 03-09-2021, 07:24 PM

the og's out the woodwork

dat 996 tho

**xxxxxxx** · 03-11-2021, 10:44 PM

Holy hell. I wish I had the time, skills and tools to make that that stuff.

**QWKBMW** · 03-19-2021, 11:59 PM

looks good man...been awhile bro..

lets get together soon!

**LWRNCE** · 03-23-2021, 12:04 AM

Originally Posted by QWKBMW

looks good man...been awhile bro..

lets get together soon!

Lets do it when this whole covid stuff passes over. Tell the family I said whats up!

**jonjon0nline** · 03-26-2021, 12:27 PM

Need more pics

**LWRNCE** · 05-24-2021, 04:27 AM

Bump...

Thread: Do you like carbon fiber?

Thread Tools

Do you like carbon fiber?

Similar Threads

Real Carbon Fiber electric and heated mirrors for $330+shipping

FS: Carbon Fiber Steering Wheel

Carbon Fiber Hood, anyone?

Carbon-fiber roundel on ebay

Carbon Fiber Hood, anyone?

Bookmarks

Bookmarks

Posting Permissions