H&R Sport Springs, Stock E36 Springs, Vorshlag Whiteline Short Swaybar Endlinks

[Bravoaloha]

I have two sets of e36 springs. H&R Sports from a Bilstein setup. The fronts will only will fit smaller Bilstein bottom spring perches. Will not fit the "universal" stock/Koni spring perch size. Rears will work on any E36. $100. If anyone wants the struts and mounts to go with these I will include them for $100 but they are shot.










Second set, Stock springs from a 328is. Same deal, I have the stock setup for these that are shot. $50 for the springs, I will include the shocks/struts if anyone wants them.



I also have Whiteline From Vorshlag Shortened E36 Front Adjustable End Links listed over in the racing forum. Paid $130, $65 takes them.

https://www.bimmerforums.com/forum/s...30-E36-E46-E92

[Bravoaloha]

Bump

[Bravoaloha]

Bump

[tesnve333]

How much for springs shipped to 95148?

[Bravoaloha]

Bump! Open to offers

[bluptgm3]

I have H&R Sports from a Bilstein setup. $100. If anyone wants the struts and mounts to go with these I will include them for $100 but they are shot.

I believe the first set of springs is a set of H&R 50410-55 OE Sports for the E36M3 that uses the smaller 1995 E36M3 ‘hat’ or upper spring perch. 1995M3 spring plate 31332227348, spring pad 31331128523.
These springs are intended for use on the smaller diameter spring perch ‘M3’ struts.

…..If anyone wants the struts and mounts to go with these I will include them for $100 but they are shot.

Can you supply a photo of the struts and the strut mounts?

[Bravoaloha]

I believe the first set of springs is a set of H&R 50410-55 OE Sports for the E36M3 that uses the smaller 1995 E36M3 ‘hat’ or upper spring perch. 1995M3 spring plate 31332227348, spring pad 31331128523




Can you supply a photo of the struts and the strut mounts?

I will check my shop and see if I still have them. They are definitely the smaller in diameter springs, because I was going to reuse them but they did not fit the new Koni shocks I got.

[Bravoaloha]

Few pics below. You can see size difference between the stockers that came on my 328is. These were in Bilstein Shocks, which I remembered I sold. I also put one in the stock front shock and you can see the size difference. Rears are about the same. Hope this helps.

[bluptgm3]

Thank you!!
Counting the coils of the front springs,
while the H&R spring is shorter it has one more wrap and the coils in some cases have shorter pitch or distance between coils.
Simple spring calculation analysis tells me this is a softer spring initially, if the wire diameter is the same. The rear spring is similar.

Lowering a car generally raises the ‘oll center and does not require a stiffer spring due to the higher roll center.
H&R OEM Sports have a lower rear spring rate than Dinan springs.