Hi Everyone,

I am restoring an E24 Alpina B2 but this question will probably be more focused towards E9 owners.

We've gotten to the point of fitting the B2 airbox on top of the 3 webber carbs although the studs from one of the carb adapters doesn't align with the airbox chambers and the fuel ports will prevent the box from sitting properly.

Is there anything obvious I am missing? is there a special adapter for that 3rd carb? Will different adapters fix the fuel port clearance issues? Are the box chambers incorrect?

Any thoughts or suggestions on this is much appreciated.. I'm awaiting acceptance to the e9coupe.com. Thank you.

IMG_5179.JPGIMG_5182.JPGIMG_5181.JPGIMG_5180.JPG