$500 - Apex EC-7 Square - 18x10.5 w/ tires - Minor bends, Cosmetically great

[nlav26]

For sale is a square set of Apex EC-7s in Anthracite finish. Specs are 18x10.5 et27 on 275/35 Hankook V12 Evo2. Hub bore was professionally machined to 74.1 by Perfect Metal Finishing in NJ. Obviously they can be run w/ hub rings as well on non-e39s. The tires have maybe 3-4k miles on them, lots of life left. This setup requires camber plates and a 5-12mm spacer (depending on your suspension) for the fronts. I ran them with a 12mm spacer and about 2.5 degress camber with GC coilovers and the fitment was perfect with no rubbing. Needless to say but the car felt incredible with tons of grip.

Cosmetically they are in near perfect condition (one blemish in pics), BUT I believe 2 or 3 of the wheels have minor bends. When I had these mounted on my M5 I could only notice a vibration once I got around 70 mph. Around town they were perfectly fine. For $100-150 per wheel you could have these professionally straightened out and would make this a steal. I need them gone fast because I no longer have anywhere to store them and sold my M5. Because of this I am only asking 500 OBO for the set w/ tires. Local pickup in NJ only.

pics:
https://drive.google.com/drive/folde...vj?usp=sharing

Thanks
Nick

[SLA]

pmed

[nlav26]

Sold