Has anyone tried remote mounting a clutch master reservoir

[e21Luis]

I recently replaced my brake master and I seem to have damaged the line or the seal on the clutch master. I've done this before and im so done with the way its setup. I see wilwood sells some kits but was wondering if anyone reccomended a particular kit. I was also thinking maybe welding an an fitting to the clutch master.

[autox320]

I recently replaced my brake master and I seem to have damaged the line or the seal on the clutch master. I've done this before and im so done with the way its setup. I see wilwood sells some kits but was wondering if anyone reccomended a particular kit. I was also thinking maybe welding an an fitting to the clutch master.

We used off the shelf 2002 parts. Actually this is common practice in e30m3's due to carbon airboxes they give a "kit" of 02 parts to relocate.

Far as ease of access we gave in long ago due to the pain of E21 clutch master cylinder location. Cut a large window hole in the wheel well. Can easily reach to remove it and or fix it when needed. It's one of those items to repair that fits the joke of; the engineers wife must of been sleeping with a mechanic.

[e21Luis]

This is a real clean setup definitely going to start on this in the coming week. Might even consider drilling the window hole as well.

[e21Luis]

I used some elbows off pelican parts to remote mount both reservoirs and the whole job took at least half the time. Big difference