So, I need a little guidance from you folks with more knowledge and experience. My son just purchased a 2008 335xi. Looks like it has all the bells, etc., but some not connected. For example, after some research I found that the car is:
S5GAPreparation Alarm System
what does it take to add this to an older 2008 car? Is it just a module?
thanks for you help and support.
The alarm kit
This is what I found in case anyone has the same question:
Check out this post:
https://www.team-bhp.com/forum/diy-d...m-install.html
It has the step-by-steps and part number for ordering.
This is what you need to order - BMW P/N: 65120403658
Please check compatibility with your car beforehand.
RealOEM.com BMW Parts Catalog is a good place to verify part numbers and see what's the right P/N for your car.
Here's what you get in your retro fit kit:
1 x Siren
1 x Siren mounting plate
1 x Hex-head nut w/plate for mounting siren
2 x Hex-head screws for siren mounting plate
1 x Mounting bracket
3 x Hex-head nuts w/plates for mounting bracket
1 x Ultrasonic module for car interior
1 x Hood-switch (or bonnet-switch)
1 x Notched mounting bracket for hood-switch
1 x Screw for notched mounting bracket
Cheers, David Brodosi
Bookmarks