Codes that come up after clearing it

[Endr56]

This is my first post on here and its about a car that i'm having trouble finding Information on some of the codes. I recently found a nice deal on craigslist for this 2010 550i GT I just purchased to resell and I am trying to do some repairs on it but I cant figure out what some of the codes mean and what their most probable causes are. The car only has 75,000 miles on it. I recently bought new air bags for its suspension.


CD9504- FlexRay, Message (Request Wheel Torque Drive Train Sum Stabilization, 43 .1 .4) Is Missing

CD9B04- FlexRay, Message (Current Rotation Wheel, 46.1.2) Is Missing

CD9F04- FlexRay, Message (State Stabilization Dynamic Stability Control (DSC) 47.1.2) Is Missing

CD9A04- FlexRay, Message (Current Brake Torque Sum, 43.3.4) Is Missing

210901- Alternator No Communication

C90D71- Seat Heating, Rear Passenger’s Side: Missing LIN Component

C90D72- Seat Heating, Driver’s Side, Rear: Missing LIN Component

E21700- Interface Integrated Chassis Management (ICM) (Drive Status, Vehicle, 0x1A1) Signal Invalid

CD8F01- LIN, Communication (Intelligent Battery Sensor) Is Missing

CDA304- FlexRay, Message (State Vehicle Downtime, 263. 1 .4) Is Missing

CF16C1- No Message Group Fault 2 (Medium Severity) Receiver Electronic Transmission Control (EGS) Transmitter DSC

CF16D1- No Message Group Fault 3 (Low Severity) Receiver Electronic Transmission Control (EGS) Transmitter DSC

C95409- Message Missing ( Seat Memory ) Advanced Crash Safety Module Receiver Driver’s Seat Module Transmitter

C9540B- Message Missing ( Seat Memory ) Advanced Crash Safety Module Receiver Passenger Seat Module Transmitter

930988- Left Head Airbag Resistance Too High

930AC1- Interface ICM (Speed 0x1 A1) Signal Invalid

D70DA5- Interface Integrated Chassis Management (Road speed, Vehicle, 0x1A1): Signal Invalid

800BDA- Side View Camera, Left: Not Connected

801C20- Central Fault Memory Full - No Control – Unit Fault

D91420- ICM CAN-Message of Vehicle Speed: Failure or Invalid Signal Content (V VEH COG, ST V VEH NSS, Alive, Qualifier, CRC)

800EC2- Sensor 1 in System Lock, Driver’s Door Switch Sticks

800F40- Direction Indicator, Front Left, Faulty

800F87- Daytime Driving Light / Side Light, Right, Faulty

E58500- Message (Stabilization Of Dynamic Stability Control, 0x173) Missing, Footwell Module Receiver, Dynamic Stability Control Transmitter

E12C11- Interface Integrated Chassis Management (Road speed Vehicle 0x1A1) Signal Invalid

E11490- No Message (Display Check Control Bypass 0x36E) Receiver Instrument Cluster Transmitter Antilock Brakes

E12C1F- Interface Integrated Chassis Management (Distant Travelled Vehicle 0x2BB) Signal Invalid

D017B7- Message (Actual Braking Torque, Total, 43. 3. 4) Missing, Receiver ICM, Transmitter DSC

D017AB- Message (Actual Braking Torque, Wheel, 44. 3. 4) Missing, Receiver ICM, Transmitter DSC

D0179F- Message (Actual Number of Sensor Edges, Wheel, 64. 1. 2) Missing, Receiver ICM, Transmitter DSC

D017C1- Message (Actual Crankshaft Speed, Wheel, 46. 1. 2) Missing, Receiver ICM, Transmitter DSC

D01B4C- Message (Nominal Braking Torque, Sum, Coordinated, 63. 1. 4) Missing, Receiver, ICM, Transmitter DSC

D0153D- Message (Display, Check Control Driving Dynamics 00, 218. 5. 32) Missing, Receiver ICM, Transmitter DSC

D01660- Message (Actuation Request, Parking Brake, 130. 1. 2) Missing, Receiver ICM, Transmitter DSC

D01B3A- Message (Qualifier Service ECBA, 63. 1. 4) Missing, Receiver ICM, Transmitter DSC

D015BC- Message (Stabilization, DSC, 47. 1. 2) Missing, Receiver ICM, Transmitter DSC

D01A1B- Message (Yawing Moment Distribution, 112. 0. 2) Missing, Receiver ICM, Transmitter DSC

C90D71- Seat Heating, Rear Passenger’s Side: Missing LIN Component

C90D72- Seat Heating, Driver’s Side, Rear: Missing LIN Component

E21700- Interface Integrated Chassis Management (ICM) (Drive Status, Vehicle, 0x1A1) Signal Invalid

D394BE- Interface ICM (Road speed, Vehicle, 0x1a1) Signal Invalid

D395BC- Message (Stabilization Of Dynamic Stability Control, 0x173) Missing, Parking Brake Receiver, Dynamic Stability Control Transmitter

D39660- Message (Actuation Request, Parking Brake, 0x225) Missing, Parking Brake Receiver, Dynamic Stability Control Transmitter

480513- Wheel Speed Sensor – No Signal

As you can see the car has a bunch of electrical problems and Id appreciate if anyone could help me.

[ezaircon4jc]

How's the battery? Always start with the simple things.

[Endr56]

I replaced the battery when I first bought the car. I drove it about 209.0 miles. I recently left the car sitting for a week straight and i had to use a starter to start it but after running it for an hour the battery has been working like new again.

[JJ22]

When you cleared the codes did they code immediately before even starting the car? Also did the code status read permanently. Check all the plug connectors on the DME as well as your ground check points. Also I do not know what price you paid but if I was you I would sell that car as soon as possible and i speak from experience. Take Care and God Bless.

[jclausen]

You can scan any bmw at any time and there are probably faults somewhere, these cars are super complicated