Window Drop Issue

[nrp22101]

Hi All,

I have a unique issue that I can't find any previous posts on.
Drivers side window drops 1/2" properly from both inside and outside handles but after a few seconds of the door being open, window goes back up. It appears to think the door is still closed.

Window up/down reset did not fix the problem.

What makes the window stay down when the door is open?

Any thoughts?

[Laserface]

[Timm]

Yes, the reason the window goes back up is the 'door open' signal is missing (I remove the connection to get my window to roll up in an emergency in the video) - the signal comes from a microswitch that I show in the video.

[nrp22101]

Yes, the reason the window goes back up is the 'door open' signal is missing (I remove the connection to get my window to roll up in an emergency in the video) - the signal comes from a microswitch that I show in the video.

Brilliant. I like how easy you make it look.
Any chance you have the micros witch part #?
I'm having a hard time identifying it on RealOEM.
Thanks for your time/expertise!

Sent from my SM-G965U using Tapatalk

[Timm]

Well, not a microswitch for the 'door is closed' signal - but part of the door module: https://www.meeknet.co.uk/e31/e31_94.pdf#page=299