I just bought a 2010 550i GT and I need help PLEASE

[Endr56]

This is my first post on here and its about a car that i'm having trouble finding Information on some of the codes. I recently found a nice deal on craigslist for this 2010 550i GT I just purchased to resell and I am trying to do some repairs on it but I cant figure out what some of the codes mean and what their most probable causes are. The car only has 75,000 miles on it.
Here are the codes:
CD9504
CD9B04
CD9F04
CD9A04
210901
CD0D71
CD0D72
C90D71
C90D72
E21700
CD8F01
CD8304
CF16C1
CF16D1
CD5409
C9540B
930988
930AC1
D70DA5
800BDA
801C20
800EC2
800F40
800F87
E58500
E12C11
E11490
E12C1F
D017B7
D017AB
D0179F
D017C1
D01B4C
D0153D
D01660
D01B3A
D015BC
D01A1B
C90D71
C90D72
E21700
D394BE
D395BC
D39660
480513

As you can see the car has a bunch of electrical problems and Id appreciate if anyone could help me.

[ezaircon4jc]

If it's just electrical, I'd start with the battery.

[White94RX]

You posted codes with no descriptions. You may as well be speaking a foreign language.

[Endr56]

Ok Ill repost with descriptions

[jclausen]

Clear all the faults and start over you can’t begin to ever diagnose that many faults

[martinav]

I own an E60, and have had GREAT results with getting codes information and ease of use with the Carly system. Its far easier than ISTA or the like, and has many BMW specific capabilities. Its not just the standard OBD2 BUS. Works on android or ios.

[Endr56]

CD9504- FlexRay, Message (Request Wheel Torque Drive Train Sum Stabilization, 43 .1 .4) Is Missing

CD9B04- FlexRay, Message (Current Rotation Wheel, 46.1.2) Is Missing

CD9F04- FlexRay, Message (State Stabilization Dynamic Stability Control (DSC) 47.1.2) Is Missing

CD9A04- FlexRay, Message (Current Brake Torque Sum, 43.3.4) Is Missing

210901- Alternator No Communication

C90D71- Seat Heating, Rear Passenger’s Side: Missing LIN Component

C90D72- Seat Heating, Driver’s Side, Rear: Missing LIN Component

E21700- Interface Integrated Chassis Management (ICM) (Drive Status, Vehicle, 0x1A1) Signal Invalid

CD8F01- LIN, Communication (Intelligent Battery Sensor) Is Missing

CDA304- FlexRay, Message (State Vehicle Downtime, 263. 1 .4) Is Missing

CF16C1- No Message Group Fault 2 (Medium Severity) Receiver Electronic Transmission Control (EGS) Transmitter DSC

CF16D1- No Message Group Fault 3 (Low Severity) Receiver Electronic Transmission Control (EGS) Transmitter DSC

C95409- Message Missing ( Seat Memory ) Advanced Crash Safety Module Receiver Driver’s Seat Module Transmitter

C9540B- Message Missing ( Seat Memory ) Advanced Crash Safety Module Receiver Passenger Seat Module Transmitter

930988- Left Head Airbag Resistance Too High

930AC1- Interface ICM (Speed 0x1 A1) Signal Invalid

D70DA5- Interface Integrated Chassis Management (Road speed, Vehicle, 0x1A1): Signal Invalid

800BDA- Side View Camera, Left: Not Connected

801C20- Central Fault Memory Full - No Control – Unit Fault

D91420- ICM CAN-Message of Vehicle Speed: Failure or Invalid Signal Content (V VEH COG, ST V VEH NSS, Alive, Qualifier, CRC)

800EC2- Sensor 1 in System Lock, Driver’s Door Switch Sticks

800F40- Direction Indicator, Front Left, Faulty

800F87- Daytime Driving Light / Side Light, Right, Faulty

E58500- Message (Stabilization Of Dynamic Stability Control, 0x173) Missing, Footwell Module Receiver, Dynamic Stability Control Transmitter

E12C11- Interface Integrated Chassis Management (Road speed Vehicle 0x1A1) Signal Invalid

E11490- No Message (Display Check Control Bypass 0x36E) Receiver Instrument Cluster Transmitter Antilock Brakes

E12C1F- Interface Integrated Chassis Management (Distant Travelled Vehicle 0x2BB) Signal Invalid

D017B7- Message (Actual Braking Torque, Total, 43. 3. 4) Missing, Receiver ICM, Transmitter DSC

D017AB- Message (Actual Braking Torque, Wheel, 44. 3. 4) Missing, Receiver ICM, Transmitter DSC

D0179F- Message (Actual Number of Sensor Edges, Wheel, 64. 1. 2) Missing, Receiver ICM, Transmitter DSC

D017C1- Message (Actual Crankshaft Speed, Wheel, 46. 1. 2) Missing, Receiver ICM, Transmitter DSC

D01B4C- Message (Nominal Braking Torque, Sum, Coordinated, 63. 1. 4) Missing, Receiver, ICM, Transmitter DSC

D0153D- Message (Display, Check Control Driving Dynamics 00, 218. 5. 32) Missing, Receiver ICM, Transmitter DSC

D01660- Message (Actuation Request, Parking Brake, 130. 1. 2) Missing, Receiver ICM, Transmitter DSC

D01B3A- Message (Qualifier Service ECBA, 63. 1. 4) Missing, Receiver ICM, Transmitter DSC

D015BC- Message (Stabilization, DSC, 47. 1. 2) Missing, Receiver ICM, Transmitter DSC

D01A1B- Message (Yawing Moment Distribution, 112. 0. 2) Missing, Receiver ICM, Transmitter DSC

C90D71- Seat Heating, Rear Passenger’s Side: Missing LIN Component

C90D72- Seat Heating, Driver’s Side, Rear: Missing LIN Component

E21700- Interface Integrated Chassis Management (ICM) (Drive Status, Vehicle, 0x1A1) Signal Invalid

D394BE- Interface ICM (Road speed, Vehicle, 0x1a1) Signal Invalid

D395BC- Message (Stabilization Of Dynamic Stability Control, 0x173) Missing, Parking Brake Receiver, Dynamic Stability Control Transmitter

D39660- Message (Actuation Request, Parking Brake, 0x225) Missing, Parking Brake Receiver, Dynamic Stability Control Transmitter

480513- Wheel Speed Sensor – No Signal

[JJ22]

I am confused why you need codes with descriptions when you are a ASE and BMW Master Certified Technician. Asking for descriptions on all those codes, really?
Endr56 your car probably has a N63 engine, sell it quick. Money Pit.

[White94RX]

I am confused why you need codes with descriptions when you are a ASE and BMW Master Certified Technician. Asking for descriptions on all those codes, really?
Endr56 your car probably has a N63 engine, sell it quick. Money Pit.

You're new to this forum. You think insulting people is a good idea? Yes I am ASE and BMW Master Certified. You think I have thousands of codes memorized? You need to watch your attitude because you're not making any friends thus far.

[JJ22]

Not here to make friends but in hopes to get assistance with my car. I was not rude but see the responses to new members. Perhaps you old members should read the respect policy your selves. I dud not use derogatory language. I have not received any help before this issue at hand, thus once again a bad response by you. Put your selves in a newby shoes. By the way just because were new to the forum does mot mean we have mo brains on mechanics.