Relatively new to the area and needing an independent shop that can replace the clutch and associated parts and an oil pan gasket on my '95 M3. I was prepared to the work myself so I purchased all of the parts. I subsequently injured my neck and am unable to do the job. Trouble is, I haven't found a shop that will accept owner supplied parts. Frustrating to say the least. Anyone have a shop they would recommend that will accept my parts?
Lovitt Motors in Monroe.
Mark Lovitt
206-250-9651
17461 147th St SE #8
Monroe, WA 98272
https://lovittmotors.com
Mark’s rate is (or perhaps was) really competitive.
Tell him Kim sent you.
My experience is that he installs (quality) customer supplied parts.
Prova Motorsports
Christopher Benny
(ex Group2 employee under Joe English ownership)
(206) 420-8161
4022 23RD AVE W
SEATTLE, WA 98199
http://www.provamotorsports.com/#intro
Fisherman’s Terminal area
Sent from my iPhone using Tapatalk
Last edited by bluptgm3; 09-29-2020 at 12:26 PM.
Most shops don’t want customer purchased parts:/ welcome to the area! There’s quite a few decent BMW shops that I’ve used in the past...
Eastside Bavarian and 22RPD are my favorites for jobs I don’t wanna do
98 M3 sedan
Aurora Clutch and More did my customer supplied clutch on my E36 M3. Give them a call.
I'd check with West Works in Redmond too, good guys.
CBlock
Achtuning in Redmond is great. They don't mind using customer supplied parts.
Feel free to ask about my car:
TRM Coilovers 560f/784r | Epic Motorsports Tune | Apex Arc-8 17x9.5 et35 | Wilwood SL-4 BBK
M50 Manifold | ASC Delete | Dinan BBTB | Fan Delete | Power Pulleys | Dinan CAI | S54 Oil Cooler
Z3 Rack | Crossbrace | 3.38 LSD | Dinan Strut Tower Brace | AKG Chassis Mount Shifter
SS Long Tubes | SS Race Exhaust | LTW Replica Wing | MM Underpanel | CF Sunroof Delete
OE GT Front Splitter | Rear Rollbar | Rear Seat Delete | BW Fuel Starvation | Turtle Labs Door Panels
And Really Old Paint
Check out my YouTube channel for more DIY's and videos about my E36 M3
Bookmarks