Bavarian Soundwerks
Results 1 to 3 of 3

Thread: Trying to find 12v for camera in engine bay

  1. #1
    Join Date
    Mar 2012
    Location
    CT
    Posts
    37
    My Cars
    Z4

    Trying to find 12v for camera in engine bay

    Not dash cam. I already tap into rain sensor

    I got one of them android 10.25 on my e85, got the rear camera installed, recently got the module to split the inputs for front and back camera.

    Just need to find a place that I can power 12v for the front camera at the front bumper. Camera is those cheap thing from aliexpress with RCA and a red line for power.

    I been looking for weeks but never found any good answers.

    Thanks in advance

  2. #2
    Join Date
    Jul 2011
    Location
    Arlington, VA
    Posts
    9,942
    My Cars
    2018 BMW M240i
    You’re looking for switched power. That is, power that’s there only when the ignition switch is in the run or start position. First question is how much current does the camera draw? There are plenty of switched power circuits under the hood but most are low current circuits. It might be better to run a wire from the dash through the firewall.

  3. #3
    Join Date
    Mar 2012
    Location
    CT
    Posts
    37
    My Cars
    Z4
    Quote Originally Posted by MarcoZandrini View Post
    You’re looking for switched power. That is, power that’s there only when the ignition switch is in the run or start position. First question is how much current does the camera draw? There are plenty of switched power circuits under the hood but most are low current circuits. It might be better to run a wire from the dash through the firewall.

    Yes, something something like this.. after market, they dont print amp but i found most camera 500ma/750ma.. under 1 amp. Thanks

    https://www.amazon.com/gp/product/B074P45P7G

Similar Threads

  1. 12v power line in engine bay.. front camera
    By rsutoratosu in forum 2002 - 2008 Z4 (E85, E86)
    Replies: 0
    Last Post: 09-16-2020, 04:26 PM
  2. Driod X Camera Picture. (engine bay)
    By 5oh in forum 1992 - 1999 M3 (E36)
    Replies: 19
    Last Post: 09-15-2010, 04:43 PM
  3. Need an 12v ignition wire in engine bay
    By pelotudo in forum 1991 - 1999 (E36)
    Replies: 3
    Last Post: 04-17-2009, 02:52 AM
  4. Good 12v source in the engine bay?
    By Racerhoze in forum 1988 - 1996 (E34)
    Replies: 4
    Last Post: 08-21-2008, 09:41 PM
  5. Anywhere I can find a diagram of the engine bay?
    By always legit in forum 1992 - 1999 M3 (E36)
    Replies: 4
    Last Post: 05-26-2006, 02:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •