I am buttoning up the front end of my Z3 after a PS hose refresh.
There is this yellow connector dangling loose by its wires and normally hidden by the splash shield behind the radiator.
Anyone know what it is and should it be secured somewhere?
The photo is from the ground looking up.IMG_0977.jpg
Thank you.
Steve
Alexandria, VA
2000 BMW Z3 Roadster 2.8
2020 BMW 230ix (Convertible)
2015 MINI Cooper S (Convertible)
2015 Jeep Grand Cherokee Limited
Outdoor temperature sensor
https://www.turnermotorsport.com/p-1...31-e32-e34-z3/
90,700 miles 1992 BMW 735iL Azure Blue Metallic with Silver Grey leather interior ‣My car ‣My YouTube channel
It plugs into a hole in the upper passenger side of the bumper cover grill on the non-m cars.
It provides air temperature to the on board computer display in the clock, controlled by pushing the end of the left stalk.
It pokes its tip through a hole in the black plastic fascia beside the driver side fog light.
How it is mounted, I have not looked.
BMW MOA 696, BMW CCA 1405
I think it also controls the heated windshield washer ports and possibly the heated mirrors
Thank you. Was able to find the port in the grill and secure it properly.
Last edited by sjfuqua; 08-07-2020 at 10:38 PM.
Steve
Alexandria, VA
2000 BMW Z3 Roadster 2.8
2020 BMW 230ix (Convertible)
2015 MINI Cooper S (Convertible)
2015 Jeep Grand Cherokee Limited
Bookmarks