Who wants the best Strut Brace ever Made?

[Jamesons Viggen]

The transmission, clutch and flywheel out of an E46 will fit, I've done 2 or 3 of them. I am not positive of the source (M3 or 330 say) as I did none of the parts gathering, the customers always have, but the information must be out there (Just ask Jameson, his was the most recent...).

I got that, a dealer rebuilt low mile 420 box in as new condition for $1200 3.5 years ago. I had to have a buddy in Canada help me get the Euro E36 trans mount for about $70.

[captaintyler888]

I would be interested in putting my name in for one of these strut braces as well. Just bought myself a Z3 two weeks ago, and would definitely like to start stiffening it up.

Gotta look into the diff mount and rear trunk pan reinforcements as well :P

[mpire]

If you want to reduce rattles, you are better off tightening screws and adding some felt tape where plastic pieces meet. Besides, the Dinan strut bar has a carbon fiber inlay CARBON FIBER! and it says Dinan which adds horsepower on its own.

See, if I see the DINAN logo I think the person got swindled by a BMW Stealership salesperson and they didn't know any better. All that talk of a warranty and all can be really appealing to some people. I've seen the dinan stuff, and honestly its pretty sub par. Its always a half measure for the twice the price of the best stuff.

I picked as many factory airboxes as I could carry one year at homecoming when they were selling and installing those DINAN cold air intakes that never fit quite right. Either way, if you got an Z3M we got something to talk about, so its just fine with me.

I'll be asking for a price for 4 or 5 braces and we can go from there.

[jjmtools]

I got this Rogue Engineer Strut brace on the SG, and I think its my hands down favorite.

However, there were only 5 made and that was that, I guess people don't like one piece all aluminum hand welded strut braces that fit the S54.

Granted the Strong Strut is a good piece, but its a solid thick bar that's many times heavier than the RE special. I own two, and wouldn't remove a SS for the RE special racing brace, but I have 4 coupes so you already know I'm categorically insane.

Ben has graciously offered to have another made for me after some ribbing from my buddy Milla, and I was going to see if anyone else wants to get in on the action.

Its the best looking and best fitting for Z3s, hands down.

There have been only 5 made.

That gives me a 20% market share, but if there are 6 and I have 2, then my market share goes up to 33%.

If you have serious interest, then chime in and we can make it happen.

Attachment 675266

made in California by renowned builder MASON ENGINEERING . NET

[mpire]

Just heard back from Ben regarding the strut brace pricing.

He said $350-$375 so that seems extremely reasonable.

[BimmerBreaker]

Ill take mine as $350 credit towards the seat covers, thanks

[mpire]

Ill take mine as $350 credit towards the seat covers, thanks

You focus on making me some seats. I got euro glove boxes and dash panels and all kinds of parts you were going to give me credit for. lol

[pclemg]

Just heard back from Ben regarding the strut brace pricing.

He said $350-$375 so that seems extremely reasonable.

Sign me up!

[solimans]

I’ll take one.

As long as they fit 1999 z3 coupe 2.8


Sent from my iPhone using Tapatalk

[mkydsm]

Just heard back from Ben regarding the strut brace pricing.

He said $350-$375 so that seems extremely reasonable.

I'm in, let's get it going!

[mpire]

I’ll take one.

As long as they fit 1999 z3 coupe 2.8

It will fit any Z3 or E36.

Its the only thing that fits the S54 cars without modifications because the breather tube is right in the way of most braces.

[scenturion]

I'm in.

[BimmerBreaker]

You focus on making me some seats. I got euro glove boxes and dash panels and all kinds of parts you were going to give me credit for. lol

I think I forgot to call you to take your seat money... Sorry haha, Ill call you tomorrow

I was serious about wanting a bar though! So sign me up 👍🏼

[golgo13]

I'm in 100%.

TAKE MY MONEY

-DuctDude

[BimmerBreaker]

1. pclemg
2. solimans
3. mkydsm
4. scenturion
5. BimmerBreaker
6. golgo13 (aka DuctDude)
7.

[dorifto88]

1. pclemg
2. solimans
3. mkydsm
4. scenturion
5. BimmerBreaker
6. golgo13 (aka DuctDude)
7. Dorifto88

[phonuff]

1. pclemg
2. solimans
3. mkydsm
4. scenturion
5. BimmerBreaker
6. golgo13 (aka DuctDude)
7. Dorifto88
8. phonuff

[solimans]

It will fit any Z3 or E36.

Its the only thing that fits the S54 cars without modifications because the breather tube is right in the way of most braces.

Roger that, thank you. I’m in for one.


Sent from my iPhone using Tapatalk

[kolosy]

What’s the timing? I’m in.

[Serena1]

Yes please! In!
I’ll fix you up with a US address if it’s a challenge to have it posted to Australia.

[Bigmac834]

I'll take one

Sent from my SM-F900U1 using Tapatalk

[Pat Gautier]

I’m in. Worked with Rogue when I got my diff cover and they helped me out cutting down a speedo impeller wheel to fit. Happy to support them.


Sent from my iPhone using Tapatalk

[s8ilver]

I certainly don't need one, so I'm in.

Sent from my SM-G975F using Tapatalk

[KBH22102]

Put me down for one as well, looking at my silver SS just bothers me.

[golgo13]

Ben has graciously offered to have another made for me after some ribbing from my buddy Milla, and I was going to see if anyone else wants to get in on the action.

Ben who?

Here's the updated list:

1. pclemg
2. solimans
3. mkydsm
4. scenturion
5. BimmerBreaker
6. golgo13 (aka DuctDude)
7. Dorifto88
8. phonuff
9. kolosy
10. Serena1
11. Bigmac834
12. Pat Gautier
13. s8ilver
14. KBH22102
15.
16.