Results 1 to 3 of 3

Thread: Turbo Transformer Boost Controller. Simple, Reliable & Fun!

  1. #1
    Join Date
    Jan 2017
    Location
    Las Vegas
    Posts
    2,616
    My Cars
    335,328

    Talking Turbo Transformer Boost Controller. Simple, Reliable & Fun!

    I had the chance today to try the Turbo Transformer in my car, and I'm very impressed!

    It's a very simple piggyback with only two sensors to connect. It'll take a few minutes to install. One of its best features is Bluetooth capability that allows you to use the TT app to change maps and settings.

    I took a few screenshots of the app,and I figured i would show you how it works.

    Setup

    • Ignition on , engine OFF
    • Open the Turbo transformer Bluetooth app
    • Select connect
    • Click on settings, then select Zero to calibrate the unit (you only need to do this step once. No need to calibrate the unit every time you turn on the car)




    Base PSI:
    This is the PSI level at which the tuner is active. when your boost is below this PSI, the unit is not active and the car is running at stock power

    Delta PSI:
    This is the maximum amount of PSI the unit will be adding to stock. Its set to +2 PSI by default but can be increased to +4 PSI (please use with caution)

    Slope (Rate):

    • This value dictates how fast you want the unit to add boost
    • Slower Boost increase will result in a smoother power delivery
    • Faster boost increase will result in maximum power and responsiveness



    Graph:

    • The X axis is your stock boost. The Y axis is what the ECU is reading
    • The grey line is stock power (X and Y will always be equal)
    • The white line is your current map
    • The red line is your custom map



    Power Modes


    • Power Default
    • Max Eco
    • Hybrid
    • Custom



    Power Default


    • The default map is +2 PSI
    • When X is 16 PSI, Y is 14. This means when you car is pushing 16 PSI, your ECU is reading 14 PSI. It will add 2 more PSI to get to the 16 PSI target boost resulting in an actual PSI of 18.
    • Note: the tuner is not active till boost reaches a set PSI value (Base PSI). In this case its 11 PSI




    Max Eco

    • This map is the opposite of default power
    • The ECU read value is higher than actual boost, which results in the ECU lowering the PSI




    Hybrid

    • This is a very unique and interesting map.
    • Its on ECO settings when boost is lower than your base PSI & on Default Power settings once boost exceeds your base PSI




    Custom


    • In this map, you get to control the base PSI, delta PSI and slop rate
    • Please use with caution



  2. #2
    Join Date
    Jan 2017
    Location
    Las Vegas
    Posts
    2,616
    My Cars
    335,328

  3. #3
    Join Date
    Jan 2017
    Location
    Las Vegas
    Posts
    2,616
    My Cars
    335,328

Similar Threads

  1. Turbo Manifold, Boost Controller, FPR, Fuel Rail, Etc.
    By iflytii in forum Forced & Chemical Induction Parts
    Replies: 5
    Last Post: 03-01-2016, 03:06 PM
  2. turbo 328is boost controller help
    By kalibmw in forum Forced Induction
    Replies: 4
    Last Post: 06-10-2009, 10:35 PM
  3. FS: ATP Turbo manual boost controller.....$50 shipped!
    By trthrrt489 in forum Forced Induction
    Replies: 5
    Last Post: 04-21-2005, 10:53 AM
  4. FS: turbo, turbo timer, boost controller, and blow off valve
    By Parked325is in forum BMW Parts For Sale sponsored by Bavarian Auto Recycling
    Replies: 4
    Last Post: 03-03-2005, 12:53 AM
  5. Turbo people -- boost controller and knob functions
    By NoSoup4U in forum Forced Induction
    Replies: 3
    Last Post: 06-13-2003, 10:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •