Resolved I used my friends cable and it worked good, the cable he had is
https://www.ebay.com/itm/USB-cable-for-Triumph-Motorcycles-TuneECU-FTDI-FT232RL-Chip-OBD-II-KTM-Tune-ECU/303511528765?pageci=bcefb683-a9dc-464e-ba1e-48292fdbeec8&epid=1887769895
If you have this issues I described below it’s your cable most likely
I have some trouble with BMW Flash and MSS Flasher, when I try to read the ECU in my 2002 m3 I get an error :
In MSS flasher it says this:
Detecting FTDI ports
Found 1 device
Port opened
Timeout waiting for echo from FTDI
Trouble Iding the ECU
I tried using the Ross tech vids and bmw scanner 1.4 FTDI cables
In BMW Flash I got the message attempting to communicate to ECU and then it went back to the main screen.
Last edited by oleg8831; 07-02-2020 at 11:58 PM.
Bookmarks