Member
Removed from a 1999 328is that one of my friends totalled. S/C is a Vortech V1 in good shape. I have a bunch of the Dinan pieces to go with it, and some extra pullies, intake piping, Dinan turbo timer, plus a Kassel tuned DME. These kits have a CARB ID number on the blower. I have the M52 that it was on, so I can include whatever other pieces may be necessary to set this up in your car. Blower is located in 01775, but I may be able to travel some to meet up. I have videos I can send through facebook messenger of the running setup, both before and after the accident. I also have additional parts available from the same car.
Would entertain trades plus cash on either end depending for the following:
-E36 parts- Modena vaders
-Recaro SR3's
-LSx parts- 243/799 heads, cam
-Dirt bikes- Street legal KTM, Honda, Yamaha, XR100
-E36 M3 or E36 coupes
https://drive.google.com/file/d/1ph1...ew?usp=sharing
Price drop: $2500
Last edited by squashman702; 07-03-2020 at 09:49 AM.
Instergrams: @davemakepictar
Member
That's a early RMS (Dinan clone kit).... FYI
• Built S52 w/Dinan ISR-3 kit, NickG Stage 2+ Tune, Dinan Vortech V2 Supercharger, Dinan Air to Air Intercooler, Dinan CAI, Porsche 803 HFM, Buldogge 6" crank pulley, Griptec 2.90" blower pulley, Eurosport UD pulleys, Dinan 3.38 Diff, Dinan front/rear Swaybars, Dinan springs, Koni Yellow Sport Struts, Ground Control end links, South Bend Clutch Stage 3 Organic, AASCO Light Weight Flywheel 18.5#, Zionsville Radiator & Oil Cooler, Riot Racing BBTB, Schrick Intake Manifold, 42# Injectors, Schrick cams 264/256, Forged Wiseco pistons 9.0 comp., Forged Eagle rods, Supertech dual valve springs & valves, VAC crank & bearings, Supersprint mufflers, Euro Z3 midpipe, Raceland euro headers, Walbro 255, Bevauto ignition coils, Vortech Mondo bypass, Bailey Diverter DV30, Ireland Rear Subframe Bushings, Mason Engineering Strut Brace, Mason Engineering Clutch Petal, Apex 18" EC-7 Wheels, Full Custom Sound System, two trunk lids (with & without OE spoiler), Hardtop, Trunk full of AK's...
Member
I think the mounting bracket may have been swapped out at some point- I have a lot of piping with Dinan part numbers on it. Will do more research.Originally Posted by bubbafett
Last edited by squashman702; 06-18-2020 at 09:16 PM.
Instergrams: @davemakepictar
Member
BMW E36 M3 Expert
Only a few parts are Dinan. These parts could be purchased from Dinan 5+ years ago to fill in the blanks with kits that were missing parts.
I wouldn't advertise (or price) this as Dinan kit.
Member
Thread edited, price dropped.
Instergrams: @davemakepictar
Member
Is this still for sale?
Posting Permissions
Reply With Quote
Bookmarks