I have the 4 gauge consoles for sale again!
$55 plus shipping, via Paypal, here is a foto, Aluminum 5082, bead blast with Black Matte Finish (Type 2)
Last edited by BMWCCA; 06-10-2020 at 12:08 AM.
Aluminum 5082 Sheet Metal with bead blast and Black Type II Anodized finish
$55 plus shipping, payment via paypal, if someone wants to receive a bulk shipment and distribute from the US for cheaper savings cost that is also possible. Shipping is $39 for up to 60 lbs, perhaps a bit cheaper if I get a direct address for quoting.
Part itself is 55grams, and perhaps can also be shipped via a stiff document shipping envelope. I can send more pics if needed
Thanks!
Andre
Any pictures of part installed?
Thanks!
I do not know if someone has fitted this to a manual car, best case trim the bottom of the panel where it touches the wood.
Actually I think it would be better to put in a metal brake and bend it as I see there is space at the bottom of the gauges.
This would be the cleanest way, it is 1mm Aluminum so no big deal. Protect the surface and bend as needed.
I know there is a short trim and long trim for the manual cars but I do not have this console to test fit.
You can see in the pic below that it just about touches the edge of the automatic trim panel on the right side. If you have the short trim perhaps?
Last edited by BMWCCA; 06-10-2020 at 12:52 PM.
I have the longer trim piece in my console. You have a good point, it looks like there would be enough room to fold back the lower edge and make it fit. I would be happy to purchase one to experiment with, but its hard to justify an extra $40 for shipping. If we can figure out a way to get several of these pieces shipped to the US to save on shipping and then redistributed I am on board
Yeah that would work.
I just shipped one to Hawaii for €10,30 so the cost for each console (provided I keep the total weight no more than 200 grams) is going to be very reasonable.
Shipping 2 consoles in one box will put it up to €11,50 for max of 300 grams.
So I could ship them individually or all in one box and you guys send them out.
3-5 days Priority International from Italia Poste office.
€59 for quantity 1 shipped to USA
€60,50 for quantity 2 shipped to USA
and if you send paypal (ferrariformulauno@yahoo.com) as friend/family I will not have to pay the 2% tax....
Thoughts?
Hey Andre!
I will buy one too, I really want the Jarmo style for my auto. Justin is going to led me his hopefully to repop for us automatic guys.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Hey Eric great!
Paypal me €59 to ferrariformulauno@yahoo.com send as friend/family and email me your address.
I will ship them out Monday, thanks!
Andre
Bump
€59 Paypal to ferrariformulauno@yahoo.com gets you 1 console shipped to US, Puerto Rico, Alaska and Hawaii.
€57 gets you 1 console shipped anywhere in Europe.
Please send as friend/family via Paypal and I will get them out to you the same days.
Thanks to the guys that have already ordered!
Andre
Finish versus original factory instrument cluster:
IMG_4448.jpg
e23 temp instrument cluster close up.jpg
Bump!
Get your orders in before the August 10th shutdowns!
Andre
Back from vacation bump!
available
andre
Bump!
Bump!
To the top!
Black Friday here we come!
Another batch getting shipped Friday to the US, get your order in before the xmas rush.
Last edited by BMWCCA; 12-03-2020 at 01:07 AM. Reason: pic uploaded faile
Happy New Years!
Bookmarks