I am changing my whole suspension setup to 5 lugs so some of my old setup is up for grabs. All parts located in Chicago area.
I got modified strut housings to accept koni sport or koni race struts. Struts housings/spindles have 51mm OD shortened tubes from volvo 940 (all tig welded). They will come with solid rotors, calipers and control arm with Eurometric poly bushings. Below are the part numbers for the shocks, sleeves and hats that i used. $300 picked up
Koni race 8610-1437 strut inserts.
A1 racing A1-12457-tk 6.5" coilover sleeve
A1 racing A1-12460. Coilover adjuster
A1 racing A1-12470. Spring hats
Get some strut inserts and rear shocks to match and you will have ground control setup for half the price.
E21 parts by w grync
E21 parts by w grync
E21 parts by w grync
E21 parts by w grync
E21 parts by w grync
I also have early spindles with e12 5x120 hubs. $175 picked up
Untitled by w grync,
Next on the list is the whole adjustable rear end with 3.63 LSD. I swapped e36 LSD unit into 3.64 diff from early auto e21.
Adjusters are from garagistic (eccentric type). I por15'ed whole subframe diff and trailing arms. Subframe will come with LSD, trailing arms, brakes and poly trailing arm bushings. Poly subframe mounts and stainless braided brake lines are not included. $850 picked up
subframe2 by w grync,
subframe by w grync,
Untitled by w grync, on Flickr
Next is getrag 240: Clutch fork is missing although i might find it somwhere. I used tilton Hydraulic TO bearing. It has two holes drilled for the hydraulic lines. They will not affect the operation of the stock slave cylinder. It worked without any issues on my car. It is filled with fresh redline MT90/ MTL mix. $400 picked up
Untitled by w grync
Untitled by w grync
Untitled by w grync
Modified flywheel for Tilton 7.25" clutch- $100 picked up. Pictures are in my build thread
PM with any questions. You can also get some information on the parts from my build thread [/COLOR]https://www.bimmerforums.com/forum/s...a-budget/page6
Last edited by Retoropak; 06-14-2020 at 12:56 PM.
would you ship wheels with out tires?
I was just thinking about shipping. I am very interested, how was the fitment with out spacers with the control arm? I am converting to a group 2 and will need a 3 piece wheel so I can make them fit in the fenders.
Wheels are gone. Everything else still available.
Sent from my iPhone using Tapatalk
Bump
Sent from my iPhone using Tapatalk
Bookmarks