HELP! I really thought I was ordering the correct part for my 2003 Z4 2.5. It's the Headlamp assembly for the Driver's side. It is item #1 in the below image. I knew it was only item #1 but the big problem I have is that, there is a place to screw on the control model (part #14, but the are no connectors for that model. My current light does have the module #14, and the new light assembly has the place to attach the module but the connector is not there?
What is that control module for? This really sucks - I waited a week for this part thinking it was the right one, but it doesn't have the connector on the bottom for that module. Any ideas?
Screen Shot 2020-05-12 at 4.51.45 PM.jpeg
So you have regular head lights or xenon headlights? if you have any kind of module on them then you have xenon headlights so now go to reloem.com enter the last seven of the vin go to section 63 lights go to the head light picture and make sure your ordering the correct headlight there may be two pictures that look the same but one would be for the normal headlight and the other xenon
Bookmarks