Bilstein B8 + H&R Sport

[ZeroDarkE30]

There are a ton of articles but i cant seem to find a consensus. For running Bilstein B8s and H&R sport lowering springsIf do you need to cut the internal bump stop before installation? About to toss my front suspension back in


Sent from my iPhone using Tapatalk

[bluptgm3]

Yes, there are still recommendations out there in favor of trimming the internal bump stop of Bilstein struts.


Sent from my iPad using Tapatalk

[95BMWIC]

I have that same setup as you mentioned and I never did cut the bumpstops

I have pics of the stance below..

https://www.bimmerforums.com/forum/s...t-Selfies-quot



Here is another thread with some pics on cutting the stops..

https://www.r3vlimited.com/board/for...stops?t=239380

[agisthos]

Is there anything specific about adjusting the front suspension on an E30 ? Im not talking about installing parts, but doing the final alignment and adjustment. I can remember reading something about the car having to be in full droop as something is tightened...

[bluptgm3]

Alignment should be accomplished with WOW and ~150 lbs in drivers seat.


Sent from my iPhone using Tapatalk

[ZeroDarkE30]

Im having issues popping that cap bottom silver cap off, tried grabbing and yanking as well as a screwdriver to pry it out but havent gotten it yet. Any trick?


Sent from my iPhone using Tapatalk

[agisthos]

Im having issues popping that cap bottom silver cap off, tried grabbing and yanking as well as a screwdriver to pry it out but havent gotten it yet. Any trick?


Sent from my iPhone using Tapatalk

The guys putting these on queried me about it on friday. How did you go popping that cap off?