I'd like to setup my cluster on the bench, but I couldn't find all the info on what parts are needed as well as relevant pinouts.
My goal is to read/clear error codes and reprogram the cluster.
Currently I have sourced these parts from an E92:
Kombi
CAS3 with key receptacle, key and start button
JBBFE2
I wired everything up as in the document attached, but INPA was unable to find anything.
I was able to turn the cluster on/off with the start button / key, but that's about it.
I found this ready-made harness for sale, but didn't get a response when I tried contacting them:
https://www.ecudepot.com/product/bmw-cas3-harness/
If anyone has something similar FS, let me know!
Thank you!
Bookmarks