Lover of Sharks
Moderator
...connects to the hard line?
I see it going down in front of the driver's side at the firewall, but it's deep in my garage and it's going to be pretty hard to get down there to see if I need to roll it out from my garage or if I just need to gut it out and wedge under there.
If anyone has seen pix of the area anyone has seen, I'd appreciate it!
Member
If it's in the same place as my M6, it's right at the firewall, behind the area of the ABS pump. You have to remove all that stuff covering the driver side area at the top of the engine to get at it. On an M6, that means the whole plenum has to come out.
Jose
1987 M6
Livin the dream!
Member
On my 86 US it's @ the bottom of the firewall on the drivers side. Have to jack it up to get access.
Old School Punk
You can see it here straight up from the control arm bushing by the steering knuckle.
There maybe some other good reference pictures in the thread.
https://www.bimmerforums.com/forum/s...r-Shark!/page4
Lover of Sharks
Moderator
That's helpful, but I wish Photobucket wasn't so terrible. Do you have a downloaded version of that pic?Originally Posted by ShapeShifter
You can see it here straight up from the control arm bushing by the steering knuckle.
There maybe some other good reference pictures in the thread.
https://www.bimmerforums.com/forum/s...r-Shark!/page4
Posting Permissions
Reply With Quote
Bookmarks