Member
Where i can find coolant system bleed out screw ? on bmw e36 1.7tds 1995 66kw.
Again sorry for posting not in place, im new here
Observer/Master Skeptic
Moderator
Moved to the model specific discussion area.
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd
88M3 AW 43k miles Project FS
WTB: 3.5" Eurosport/Conforti CAI
Member
Use RealOEM.com use your vin number to find your specific model car/engine. With the bmw part number you can search the internet for the best price. But for bmw specific parts, Pelicanparts.com and RMeuropean.com and many others.
Attn. NEWBIES: Use the search feature, 98% has already been discussed.
Click the search button, select "search single content type", select the "e36 sub forum" specifically, try the "search titles" then try the "search entire posts".
shade tree mechanic
Moderator
on the tds there is only 17 Drain plug radiator M10 17111719384 https://www.realoem.com/bmw/enUS/sho...diagId=17_0090
Maybe it does not need a bleed screw, my E32 750iL also does not have a bleed screw, it is self bleeding.
On the drawing for your car there is a bleed hose from radiator to the expansion tank, same on my 750, that bleed the systems.
Last edited by shogun; 02-10-2020 at 08:18 PM.
Shogun tricks and tips for the E32 series are HERE!
Member
I just needed to get my car front higher then back. And poor liquid in cooland system, and start it up. It doesnt have any bleed screvs or smth like that. Thanks!
Member
The bleed screw, if there is one, will be on the top hose somewhere. If it isn't obvious, there isn't one. Just fill, bring it up to temp, allow to cool and fill again.
Posting Permissions
Reply With Quote
Bookmarks