i just recently installed the tme's and i believe i got the 16 ft-lb off on the torque wrench. the wrench itself is kinda weird, with a minimum of 1.4 M and 120 inch pounds. there is also KGS on there, at a good 2.8 for the lowest. i think i had it set to 2.8, but with research after the vibration, a site suggested a converted 2.2kgs from 16 ft-lb. anyone know the right conversion and howto set this darn thing? thanks.
Rob - 2000 BMW Z3 M Roadster | 1986 Porsche 944 5.3L LM4
1 ft-lb = 12 in-lbs.
So 16 ft-lbs x 12 = 192 in-lbs.
E36 DIYs: Air Pump | Vent Gauge | E46 Armrest | SmarTire TPMS
E46 DIYs: Hella TPMS | Aftermarket Horns | Window Regulator Notes | Trunk Wire Harness | Trunk 12V Socket
Bookmarks