Which parameter to code for outside temp warning?

[Johns01E38]

Many of you are familiar with the "DING" and the dash warning that it is 37F outside. This can be especially annoying in certain circumstances.
Which module is this setting controlled with? Is it something that can be changed in NCS Dummy? I looked through all my modules (2001 740i) and I cant find any way to turn this warning off, or to at least change the threshold. Any ideas???

[Johns01E38]

SOLVED: The setting for the exterior temp warning gong is in the IKE (KOMBI). I used NCS Dummy to turn off all the related warnings, then reflash module with NCS Expert. Now it will warn me on the dash at 37F, but no gong sound to annoy. Hope this helps somebody!