Hi Guys,

I have a BMW E87 that had an E90 SZN installed which meant I had no back wiper. After a while this SZN stopped working correctly so I sourced an E87 part with back wiper.

Now I've installed the part and I am trying to code the DSC back to default using NCSExpert but am receiving the following errors:

[10:18:53.070] [2020-01-25] [SERIE] 2060 PABD/CABD A_E65.IPS Cod 365
[10:18:53.070] [2020-01-25] [SERIE] Codierung fehlerhaft (allgemein) DSC_87, C_C_AUFTRAG: ERROR_ECU_CONDITIONS_NOT_CORRECT_OR_REQUEST_SEQUEN CE_ERROR
[10:18:53.189] [2020-01-25] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6
[10:18:53.189] [2020-01-25] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN

I've tried using tool32 and I also get the same issue ERROR_ECU_CONDITIONS_NOT_CORRECT_OR_REQUEST_SEQUEN CE_ERROR.

Any suggestions on what I can do or what to look for I need to get this sorted!

Thanks all!