Hey I have a 2007 650i and initially my turn signals and high beams work after about 10-15min of operation neither works my hazards work too anybody know anything about this??
It sounds like you've got a bad combination switch (part #1 here: https://www.realoem.com/bmw/enUS/sho...diagId=61_1061.
However, I would absolutely look for error codes in the footwell module with a good BMW diagnostic computer before throwing parts at it.
Chris Powell
Racer and Instructor since, well. decades, ok?
Master Auto Tech, owner of German Motors of Aberdeen
BMWCCA 274412
German Motors is hiring ! https://www.bimmerforums.com/forum/s...1#post30831471
Does the 6 have an frm module?
Oops, good catch Jay.
It's a Body Module car....which puts the lighting in the Light Control Module. So, Pete, what I said is still correct, except change "Footwell Module" to "Lighting Control Module".
Chris Powell
Racer and Instructor since, well. decades, ok?
Master Auto Tech, owner of German Motors of Aberdeen
BMWCCA 274412
German Motors is hiring ! https://www.bimmerforums.com/forum/s...1#post30831471
I have similar problem with my 2010 Bmw 650i
the rear turn signal is failing .. It looks like the hole light is one piece
I also have Cat problem
don't know how to post my issue here
please advise
Bookmarks