Results 1 to 3 of 3

Thread: 282/282 cams paul burke's profiles.

  1. #1
    Join Date
    Oct 2008
    Location
    Albuquerque
    Posts
    2,336
    My Cars
    a m3 on a 7675

    282/282 cams paul burke's profiles.

    282/282 ..240/240@.050 .440 lift for both.
    Custom profiles for m/s50/52 by paul burke ground on estas chill cast blanks.
    Brand new never run in a motor.
    Will require aftermarket springs
    Somthing in the 90+lb range at 1.400 install height.
    They will come with a cam card
    And I can supply 3d printed timing blocks to make degreeing super easy and to fully take advantage of these cams for a turbo application or NA setup The common misconception is if you install bug cams it will hurt the bottom end, not that case if you degree them properly. I can make your 70+ mm turbo spool like a 35r.
    Can be installed to accommodate either FI OR NA
    centerlines will be different for both.
    $1,650

    https://ibb.co/t3mv1q3

    [
    Last edited by das Boot; 12-29-2019 at 04:00 PM.
    World record holder for a m52 stock bottom end.
    9.41@153 c4 auto 28" et streets, e34 3.64 gearset 900+hp

  2. #2
    Join Date
    May 2019
    Location
    Maryland
    Posts
    7
    My Cars
    1995 Avus Blue M3
    Hello Iím interested in these but need a little more information. I have questions about vanos, turbo limits, drivability and fuel. I currently have 22rpd built short block with 22rpd built head with super tech hardware. I still have not purchased turbo but looking at a 7275. Please contact me here or email jturbo05@gmail.com

    - - - Updated - - -

    Hello Iím interested in these but need a little more information. I have questions about vanos, turbo limits, drivability and fuel. I currently have 22rpd built short block with 22rpd built head with super tech hardware. I still have not purchased turbo but looking at a 7275. Please contact me here or email jturbo05@gmail.com

  3. #3
    Join Date
    Oct 2008
    Location
    Albuquerque
    Posts
    2,336
    My Cars
    a m3 on a 7675
    Sold!
    World record holder for a m52 stock bottom end.
    9.41@153 c4 auto 28" et streets, e34 3.64 gearset 900+hp

Similar Threads

  1. VAC 286/272 and Sunbelt 282/272 Cam installation question
    By Da Infammus 1 in forum Track, Auto-X & Drag Racing sponsored by Bimmerparts.com
    Replies: 38
    Last Post: 08-08-2015, 10:52 PM
  2. Thoughts on Schrick 276/270 vs VAC 282/272 cams?
    By rarudduck in forum Track, Auto-X & Drag Racing sponsored by Bimmerparts.com
    Replies: 3
    Last Post: 07-13-2014, 10:54 AM
  3. E46 FS: New Delage S54 290/282 Cams
    By Lag in forum Engines, Performance Parts & Software
    Replies: 1
    Last Post: 04-12-2012, 10:48 AM
  4. M50/52 Evosport 290/282 Cams
    By Excidium28 in forum Engines, Performance Parts & Software
    Replies: 37
    Last Post: 07-30-2009, 02:36 AM
  5. Valve clearance on 272/282 schrick cam
    By Eurogp in forum 1983 - 1991 (E30)
    Replies: 4
    Last Post: 07-16-2005, 10:35 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •