So, Here's the story. I recently picked up what I believed was an M30B35, but it turns out it's a euro M30B34 with a 10:1 compression ratio. I planed on running a turbo setup on it for my e28, but I'm unsure of how the higher compression engine will take the boost. The engine in stock form makes about 220 HP, I was shooting for 400 at the tire. Will the euro M30B34 handle about 16 psi of boost with stock internals? I planned on completely rebuilding the motor with new seals, bearings and a MLS head gasket. I don't really want to get a different motor, because it has an interesting story, and is pretty rare. Any suggestions? I only bought the thing for 120$, came with ecu and harness.