Converting Fuel Injection to Weber 45 Single

[Glansdell]

I have removed all of the fuel injection apparatus and now removing wiring harness. I am removing all of the gray harness and leaving harness for alternator and starter. I am at the moment in the wiring harness and will have t o cut remaining wires that's will not be needed to run a carberator.
Can anyone lend any advise on what wires I can remove. It is fairly clear what wires are related to alternator and starter.
I have redone the head with new mild camshaft. This with the Weber should give me a fairly simple system that will give me a few more ponies.

Thanks for any help

[jbowen944]

What year is your car? If you'd be interested, I'd love to possibly buy some of your fuel injection parts.

[m60b30530i]

You still need the ignition module to fire the coil. Located on the drivers side, the wiring runs across the firewall to the distributor and coil.

[Glansdell]

It is a 1983 and there is lot's of parts. They will not be of any use to me. You are welcome to them. Where are situated. I also have a spare fuel regulator (new)

- - - Updated - - -

Thankyou very much, that make a lot of sense

[jbowen944]

Yes, I'd love all of that, especially the regulator! I'm in georgia.

[jbowen944]

Btw, I see you’re in Canada. I don’t think that’ll be a problem for shipping or anything, I can send you the cost however you’d like.

[Glansdell]

I will get them together, photo them and decide a price and will get a quote on shipping

[jbowen944]

Sounds great!

[jbowen944]

just checking in, when do you think you might be able to get some photos and a price? No rush on my end, just don't want to lose contact.