I'm trying to get a AK90+ from amazon running with little success.
I've loaded the latest software from multiple sites, updated the drivers, tried 4 different pc's win 7 and xp, multiple cables, and tried two different ak90 boxes, all with the same results.... No key errors. I was able to read keys about 3 times over 100 attempts.
Read every thread, watched every youtube video.
What am I missing? HELP!!!
I not sure anything I have to give you will help. I had only made one additional key with my AK90. The problem I encountered was the connector ( the one that goes over the circuit board chip) needed to be trimmed. The insulating tubing ( heat shrink tubing) on the connector was preventing a good connection. I assume you made sure that coating on the pins of the chip were cleaned to ensure a good connection. Good luck
Bookmarks