ET / Offset on 19" wheels

[72tpik5]

pretty sure 3% is the threshold, anything above that triggers the traction control, etc.
the 245 / 275 combo in the same profile is ~3.4%... while you might get away with it on some cars, you won't on others - by design. it is stretching the tolerance
burn off the tread on the rears and then replace just the rears without renewing the fronts and see what happens...

This could be a true statement. I took a chance in the pursuit of the ever elusive perfect balance of look, handling and ride quality. My DSC works flawlessly with this set of 19", and the set of 18" that I have as well. I wonder if the fact that my car is a M73 makes any difference?

[Hyper]

pretty sure 3% is the threshold...and then replace just the rears without renewing the fronts and see what happens...

Before & after a computer reset.
Could be an instant fault criteria versus adaption.
***
Rhetorical: Where's the threshold on thread moderation or do we just adapt?

[f13platform]

I think you’re missing cartoonz point. Just because you “can” do something doesn’t make it right or smart. Keeping the front and rear rolling diameter within 3-5% of each other is the correct way to do it. Frankly, the mis-sized tires on your car may “work”, but they don’t even look good.


Sent from my iPhone using Tapatalk

Haters always hate
I have no problem hear my car doesn't look good

I love my stance and it's my car
Zero fuck given to some internet trolls lol
Hehehe

Sent from my SM-G960F using Tapatalk

[f13platform]

pretty sure 3% is the threshold, anything above that triggers the traction control, etc.
the 245 / 275 combo in the same profile is ~3.4%... while you might get away with it on some cars, you won't on others - by design. it is stretching the tolerance
burn off the tread on the rears and then replace just the rears without renewing the fronts and see what happens...

I have never seen someone chat so much shit. I drive this over 3 years with this setup still fine
What you people don't understand is when you have 18 inches 10j and 12j wheel
Its wide and these profile scratches over
You sitting calculating oem wheels size
This is fully customized setup
By German people for me. These people Been doing stance works for years and know exactly how to do this
This is brand new hamann pg1 size
Alloys made for hamann e31

Lol believe me I schooled you guys
Trust me hehehhe it hurts I know


Sent from my SM-G960F using Tapatalk

[f13platform]

This could be a true statement. I took a chance in the pursuit of the ever elusive perfect balance of look, handling and ride quality. My DSC works flawlessly with this set of 19", and the set of 18" that I have as well. I wonder if the fact that my car is a M73 makes any difference?

Last thing you want to do is listen to these people. If you want to do something special you need to work with someone understand stance works

Join this Facebook page and witness 1000
Example and sizes has been done and working.


Sent from my SM-G960F using Tapatalk

[mbarrett635]

I still think you’re just missing the point. I’ve got nothing against 19 inch wheels. I run a set of 19 inch BBS LM‘s on my 96 850 CI. But I make sure I have the right size tires on them.


Sent from my iPhone using Tapatalk

[f13platform]

Ask these people show photo of your cars
Before make statements

Lol

Sent from my SM-G960F using Tapatalk

[f13platform]

I still think you’re just missing the point. I’ve got nothing against 19 inch wheels. I run a set of 19 inch BBS LM‘s on my 96 850 CI. But I make sure I have the right size tires on them.


Sent from my iPhone using Tapatalk

Post photo of your car
I tell you how it should be and what it can be. 19 is not good size to begins with
E31 biggest should be 18

Sent from my SM-G960F using Tapatalk

[mbarrett635]

Post photo of your car
I tell you how it should be and what it can be. 19 is not good size to begins with
E31 biggest should be 18

Sent from my SM-G960F using Tapatalk

Okay, so you are either schizophrenic or a troll -- in an earlier post, you praised someone's 20" wheels, now you say 18" is the biggest for an E31. Here is a picture of mine with 19s (the Oxford Green one -- click on the photo for a better view), which have worked fine for the past four years given the proper offsets and tire sizes. I like them; you don't have to (as an aside, I also like the 20" Alpinas on the pink/purple car you posted).

New Car pic_113b.jpg

[f13platform]

Okay, so you are either schizophrenic or a troll -- in an earlier post, you praised someone's 20" wheels, now you say 18" is the biggest for an E31. Here is a picture of mine with 19s (the Oxford Green one -- click on the photo for a better view), which have worked fine for the past four years given the proper offsets and tire sizes. I like them; you don't have to (as an aside, I also like the 20" Alpinas on the pink/purple car you posted).

New Car pic_113b.jpg

I say its possible to fit. I have seen 21 inches too.

If you want master class stance works
Then you need 18 12j ET7 to ET9
10j for front.


Well I can see how much gap is in your front wheels . I can also see due to high offset possibly ET30 or 35 you running quite slim tyres. It look like shit to my standard when you run shit size alloys No matter what size tyres you run

The red one is perfect I love style 21
CSI styling.

Also run my own setup for style 21 which is perfectly fill up arches no issue

Next time talk when you walk this road


Sent from my SM-G960F using Tapatalk

[mbarrett635]

I say its possible to fit. I have seen 21 inches too.

If you want master class stance works
Then you need 18 12j ET7 to ET9
10j for front.


Well I can see how much gap is in your front wheels . I can also see due to high offset possibly ET30 or 35 you running quite slim tyres. It look like shit to my standard when you run shit size alloys No matter what size tyres you run

The red one is perfect I love style 21
CSI styling.

Also run my own setup for style 21 which is perfectly fill up arches no issue

Next time talk when you walk this road


Sent from my SM-G960F using Tapatalk

There is no significant gap -- the front wheels are turned. And it's not just CSi styling -- it's a '94 CSi.

[f13platform]

Hamann e31

Sent from my SM-G960F using Tapatalk

[f13platform]

There is no significant gap -- the front wheels are turned. And it's not just CSi styling -- it's a '94 CSi.

Oh show me photo then
Style 21 alloys is part of CSI styling use in
E31 sports too. We talking alloys
Shove your 850 csi in your ass
You can't show off shit for me

Sent from my SM-G960F using Tapatalk

[f13platform]

Massive gap with skinny tyres
Because you have shit size alloys. Periods
Bye

Sent from my SM-G960F using Tapatalk

[72tpik5]

Massive gap with skinny tyres
Because you have shit size alloys. Periods
Bye

Sent from my SM-G960F using Tapatalk

I don't understand the attitude. I don't think anyone said anything to disrespect your opinions or car. I said I am not a fan of the stretched fitment, but I didn't say anything disrespectful. This forum is to share information, and to enjoy the 8 series, not to argue and insult. It is clear that you have a lot of knowledge and experience with the 8 series, and I appreciate that. Hopefully, we can get better at sharing our opinions and experience, without the animosity.

[gaspump]

F13platform please give it a break. Nobody is saying your setup is good or bad, well maybe some, but it's all good. You like your's and I like mine. Everyone here has a e31 that looks great and has 16,17,18,19,20,and maybe? 21 inch wheels. This site is meant to talk about, admire, and enjoy our dwindling classic cars to the masses. Let's all enjoy them while we fan.

[TedBobo]

I love my stance


Sent from my SM-G960F using Tapatalk

Nice ride height....what springs are you using?

[gaspump]

Here is one I think is just right.

[cartoonz]

I have never seen someone chat so much shit.

neither have we. WTF is wrong with you?

[shogun]

Gentlemen, please read the forum rules https://www.bimmerforums.com/forum-rules/
AGREE TO DISAGREE, RESPECTFULLY
We invite and encourage a healthy exchange of opinions; disagreements are okay. If you disagree with a member’s post or opinion, by all means, challenge the opinion. However, any challenge must be given with a sense of respect and caring for the other person. The real objective of community is to understand each other, not to attack others and convince them that you’re right. Name-calling, insults, “flaming” and attacks are not appropriate and will not be tolerated. Agree to disagree respectfully.

DON’T ATTACK EACH OTHER
Because this is so important, we’ll say it again: Don’t attack others. Personal attacks on others will not be tolerated. Challenge others’ points of view and opinions, but do so respectfully and thoughtfully … without insult and personal attack. Harassing, offensive, vulgar, abusive, hateful or bashing communications — especially those aimed at sexual orientation, gender, race, color, religious views, national origin, or disability — will not be permitted. BEFORE you post a message that is intended to embarrass, humiliate or harass another person or group of people, stop and THINK first! Harassing communications are considered to be those that may cause distress, embarrassment, unwanted attention or other discomfort. This includes posting of others private/personal information with the intent of harassing them. It will not be tolerated!