Bmw e60 dsc and coding issue

[Wolfgang009]

Hi all,
I am having problem with my e60 2007 525i. I have had the dsc light on sice bought and wanted to fix it. I have scanned through Inpa and get several code from szl and dsc. I have changed the SZl unit and coded the new vin using ncsexpert but still same issue. My question is how do you remove or deactivate the brake air flaps from the car system as they are not mounted on the car? And other question is on Ncsexpert I do not have the option to code my dsc when reading ecu the dsc just does not appear but I can read fault through inpa by going directly to chassis-dsc then read the faults. If someone could help would be greatfull I think it is a coding problem but not very familliar with ncs. Thanks

[CameronR]

Could be a faulty DSC unit? Diagnose that. I replaced mine with a junkyard unit. I didn't code the unit t9 my chassis and it worked fine. To code DSC and other modules, use Winkfp.

Sent from my LG-H915 using Tapatalk

[MauiM3Mania]

Moved to the model specific are where these cars are discussed!