Damaged Z3 M Roadster Anyone?

[mpire]

I have a Silver on Black Roadster that probably needs a hood, rear fender, bumper, front control arm and a rear subframe.

Slid into something on the passenger side.

Whats it worth before I yank the engine and send it to the junkyard?

Interior isn't bad, and the paint is good on the panels that aren't banged up.

Anyone looking for a project car?

[KBH22102]

If no takers, will you do some parting before you scrap it?

[milamookie]

I’ll take the console shifter panel if not cracked.


Sent from my iPhone using Tapatalk

[KeysCoupe]

I take it that the rear trailing arms are toast? Everything else is easily available. Any 6 cyl rear subframe fits, just doesn't have the internal reinforcement. I have most of the parts needed just as spares, except the trailing arms.
Brent, you know about spare parts!
-Donny

[MPoweredBMW5]

S52 or S54?

[mpire]

S52, 80k miles, I gotta find a way to post pix.

[KBH22102]

If you are willing to part, I am interested in the AC switch (if round buttons), seat heater switches, and DSC switch (maybe not there if S52) and also the door sill trim plates if they have intact ///M decals.

The photo link on this forum is very unfriendly. Much easier to email, kbhz3partout@gmail.com

Thanks!

[MPoweredBMW5]

Im in for 1000$ if you want to get rid of it

[BimmerBreaker]

Howd I not see this till now? Im interested. I want one to rebuild and do an engine swap on. Let me know how much for it

[s6beebe]

I’ll take the console shifter panel if not cracked.

interesting. same piece i would need.

[mpire]

Howd I not see this till now? Im interested. I want one to rebuild and do an engine swap on. Let me know how much for it

I would negotiate with you, but I wouldn't want to distract you from getting my seat covers taken care of.

- - - Updated - - -

interesting. same piece i would need.

I got a few of those, LHD or RHD.

[billcearley1966]

why is it so hard to post pics on this site? please admin, can you make it simple for us old folks who just want one click to post pics here? I can't figure out how to post a profile pic either. no one knows what my new to me Z3 M looks like.

[TexaZ3]

Just get a Flickr account.

[alquazi]

Looking for the floor pan

[alquazi]

Do you have the trunk floor panel, battery box, tool box, and exhaust heat shield?

[mikeshammer]

I take it that the rear trailing arms are toast? Everything else is easily available. Any 6 cyl rear subframe fits, just doesn't have the internal reinforcement. I have most of the parts needed just as spares, except the trailing arms.
Brent, you know about spare parts!
-Donny

That is an incorrect statement .not only does the M Have the reinforcement but the inner mounting tab for the control arms is relocated to allow for the difference in height. They will interchange if you want you roe at about 1/2 inch and the camber at about the same. I repair the crossmembers and have a jig to check them for straightness. I install the camber and caster kits .I also repair the control arms for the M. I have spares . I buy any bent or not as I make a tubular one for the e30 guys to try and keep them from using up all the stock M arms on their cars. I can tell you that you can bend the subframe without damage to the a arm but I have never seen a bent a arm with a good subframe.