For sale: complete transmission, clutch, shifter, crossmember and driveshaft from my 1200whp E46 M3. Transmission is 6 speed H pattern with straight cut gears. Gearbox is serviceable and rebuildable. Based on ZF case, but longer due to the billet housing in the middle. Has E46 M3 larger input shaft. Sounds amazing, and is completely streetable if you want to sound like a race car driver when you get your Dunkin Donuts. Roughly 15k miles on trans, mostly street use. Clutch is triple disc carbon/carbon Tilton with hydraulic release bearing and VAC Motorsports flywheel. Clutch will hold 1200 ft/lbs tq. Comes with paperwork and thicker shim for if/when it wears. Has been serviced multiple times and has next to no wear after years of use. Shifter is Autosolutions. Has two different knobs, one with micro switch. Crossmember and 2 piece driveshaft are custom. $9000 for the entire package. $4000 for the clutch/Flywheel/hydraulics. $6000 for the trans, crossmember, shifter, driveshaft. sales@maximumpsi.com -Mike
97 M3 - 8.94@164 - 8 sec street machine, all BMW driveline, factory ECU
02 M3 - 9.74@145 - Maximum PSI stage 2 turbo kit, stock motor, factory ECU
16 M3 - 9.3@151 - Built motor/twins
15 M3 - 9.2@162 - Built motor/single turbo/Ecutek
BMW SOB's turbo E30 - 8.72@158.39
follow our latest builds and upcoming events! - facebook.com/maximumpsi - instagram.com/maximumpsi
If only my money tree was in season
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Sold
97 M3 - 8.94@164 - 8 sec street machine, all BMW driveline, factory ECU
02 M3 - 9.74@145 - Maximum PSI stage 2 turbo kit, stock motor, factory ECU
16 M3 - 9.3@151 - Built motor/twins
15 M3 - 9.2@162 - Built motor/single turbo/Ecutek
BMW SOB's turbo E30 - 8.72@158.39
follow our latest builds and upcoming events! - facebook.com/maximumpsi - instagram.com/maximumpsi
Thank OBAMA.
Bookmarks