INPA SYS-0002 ECU Object Not Found Error

[JPend]

Hello, I'm rebuilding my 2008 Mini Cooper S and want to use INPA for a few things. I've done the installation of 5.01 and it connects to the car, but when I try to access and view all the modules, it displays "SYS-0002: ECU OBJECT FILE NOT FOUND". After numerous searches I found the following, but am confused with next steps.

3.6 SYS-0002: ECU OBJECT FILE NOT FOUND
Reason 1: If the external table T_GRTB.prg doesn’t exist in the directory C:\EDIABAS\ECU\ the error message will be displayed when You execute the job IDENT_FUNKTIONAL of a functional SGBD.
Solution 1: You have to download the external table using the ECCO Web Export and copy it in the directory C:\EDIABAS\ECU\.
Reason 2: The SGBD, which You want to start doesn’t exist in the directory C:\EDIABAS\ECU or is an old one.
Solution 2: You have to download the SGBD using the ECCO Web Client and copy it in the directory C:\EDIABAS\ECU\.

Apparently I need an additional file/table, but this is where I'm lost. The file(s)"R56.PRG" & "SGBD_R56" (text file) are in the EDIABAS\ECU folder, but I'm unclear on my next step.

Any help or guidance would be appreciated.

[FAL]

Still need help with this?