I was having an issue with my spal fan it would keep running when I would cut the car off sometimes and sometimes it wouldn’t. But the other day I noticed the temp rising and so I pulled over to check and where the fuse for the fan is completely melted into a ball. Would I just need to install new wiring where the fuse goes in or is there more of an issue?
What size fuse is in there?
Sent from my iPhone using Tapatalk
I want to say 20. I can look at the box the fuses came in when I get home but where the fuse is it melted into a ball... lol
Typically it’s supposed to be a 30 amp fuse
Sent from my iPhone using Tapatalk
Also is the fan relay connected to the ignition wire from the 20 pin connector?
Sent from my iPhone using Tapatalk
Yeah you’re right it is a 30. When I bought the car in 2011 the spal fan was already installed and I haven’t had an issue until about 5/6 months ago with the fan not cutting off when I cut the car off and I’ve had to replace the fuse once but that was 4 years ago. And weekend before last is when the fuse melted into the holder. Now it’s not working at all.
Bookmarks